595808
28
Zoom out
Zoom in
Previous page
1/92
Next page
Master Page: Left-start
28 EN
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
D.S.C. RECORDING
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are stored
in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
Power ( pg. 12)
Loading A Memory Card ( pg. 19)
1 Remove the lens cap.
2 Press PUSH OPEN and open the LCD monitor
fully, or pull out the viewfinder fully.
3 Set the Recording Mode Switch to “MEMORY”.
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5 Press SNAPSHOT. The “O” indication
appears while the snapshot is being taken.
To check how the image looks before
recording it in the memory card, press
SNAPSHOT halfway and hold. The “
indicator appears and stops blinking when the
captured image is focused. To cancel the
recording, release SNAPSHOT. To record it in
the memory card, press SNAPSHOT fully.
Still images are recorded in
the snapshot mode with no
frame. There is the sound of
a shutter closing.
To delete unwanted still
images, refer to “Deleting
Files” ( pg. 32).
When you do not want to hear the shutter
sound, set “BEEP” to “OFF”. ( pg. 35, 38)
To change the Image Size and/or Picture
Quality, pg. 35, 40.
A Image Size ( pg. 40, 86)
B Focus Icon ( pg. 86)
C Shooting Icon ( pg. 86)
D Card Icon ( pg. 86)
E Picture Quality ( pg. 40, 86)
F Remaining Number Of Shots ( pg. 86)
NOTES:
Even if “OIS” is set to “ON” ( pg. 37), the
Stabilizer will be disabled.
If Special Effects ( pg. 51) is engaged, certain
modes are disabled during Snapshot recording. In
such a case, the icon blinks.
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power.
To perform shooting again, push back and pull out
the viewfinder again or close and re-open the LCD
monitor.
The Motor Drive mode ( pg. 44) is disabled
when the Recording Mode Switch is set to
“MEMORY”.
When a cable is connected to the AV connector,
the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
Still images taken are compliant to DCF (Design
rule for Camera File system). They do not have any
compatibility with devices which are not
compliant to DCF.
Basic Shooting (D.S.C. Snapshot)
MEMORY
Power Switch
Lock Button
Recording Mode
Switch
SNAPSHOT Button
PUSH
OPEN
GR-HD1US.book Page 28 Monday, April 14, 2003 5:21 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-HD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-HD1 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info