291153
13
Zoom out
Zoom in
Previous page
1/28
Next page
13
Video Light (GR-SXM49/SX25 only)
To brighten the scene when natural lighting is too
dim.
Pressing LIGHT
# changes the Video Light mode
sequentially as shown below.
OFF : Turns off the light.
AUTO: Automatically turns on the light when the
camcorder senses insufficient lighting on
the subject.
ON : Always keeps the light on as long as the
camcorder is turned on.
It is recommended to set M.W.B. (
pg. 19) to
in CAMERA MENU when you use the video
light.
Even if the battery indicator (
) does not blink
if the battery packs charge is low, the camcorder
may turn off automatically when you turn on the
video light, or when you start recording with the
video light turned on.
When the Video Light mode is set to AUTO:
Depending on the lighting conditions, the video
light may keep turning on and off. Press LIGHT
# repeatedly until ON or OFF is selected as
required.
While the Sports or High Speed Shutter mode
is engaged, the light is likely to stay on. While
the Twilight mode is engaged, the light will not
activate. (
pg. 24, Programme AE with
Special Effects)
Zooming
To produce the zoom in/out effect. Digital circuitry
extends the maximum magnification offered by
optical zoom. This system is called Digital Zoom.
Slide the Power Zoom Lever
3 towards T to
zoom in, or W to zoom out.
The further you slide the Power Zoom Lever
3,
the quicker the zoom action.
Focusing may become unstable during Zooming.
In this case, set the zoom while in Record
Standby, lock the focus by using the manual focus
(
pg. 12, Auto/Manual Focus), then zoom in
or out in Record mode.
The zoom level indicator
O- moves during
zoom. Once the zoom level indiator
O-
reaches the top, all magnification from that point
is through digital processing.
When using Digital Zoom, the quality of image
may suffer. To deactivate Digital Zoom, set
D.ZOOM (
pg. 20) to OFF in SYSTEM
MENU.
Digital zoom cannot be used when the VIDEO
ECHO mode (
pg. 24, Digital Effects) is
activated.
Quick Review
To check the end of the last recording.
1) Make sure the camcorder is in the Record
Standby mode.
2) Press
2
e and release quickly.
Tape is rewound for approx. 1 second and
played back automatically, then pauses in
RecordStandby mode for the next shot.
Distortion may occur at the start of playback. This
is normal.
Retake
To re-record certain segments.
1) Make sure the camcorder is in the Record
Standby mode.
2) Press and hold either RETAKE
* or e to reach
the start point for new recording. Pressing
3
* forwards the tape and pressing
2
e
reverses it.
3) Press the Recording Start/Stop Button
0 to
start recording.
Noise bars appear and pictures may become
monochrome or darken during Retake. This is
normal.
OFF (no indication) AUTO ( ) ON ( )
DANGER
The video light can become
extremely hot.
Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
When operating, keep a distance of about 30 cm
between the video light and people or objects.
Do not use near flammable or explosive
materials.
It is recommended that you consult your nearest
JVC dealer for replacing the video light.
GR-SXM49EK_EN 02.10.18, 11:0013
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC gr-fxm39 vhs-c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC gr-fxm39 vhs-c in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC gr-fxm39 vhs-c

JVC gr-fxm39 vhs-c User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info