39850
47
Zoom out
Zoom in
Previous page
1/60
Next page
EN
47
TROUBLESHOOTING
An unusual mark appears.
¥ Check the section of the manual that explains LCD
monitor/viewfinder indications ( pg. 54 57).
An error indication (E01, E02 or E06) appears.
A malfunction of some kind has occurred. In this case
the camcorders functions become unusable.
¥ Remove the power supply (battery pack, etc.) and
wait a few minutes for the indication to clear. When
it does, you can resume using the camcorder. If the
indication remains even though you repeat the
above two or three times, please consult your
nearest JVC dealer. Do not eject the cassette. This
will cause damage to the tape.
An error indication (E03 or E04) appears.
A malfunction of some kind has occurred. In this case
the camcorders functions become unusable.
¥ Eject the cassette once and re-insert it, then check if
the indication clears. When it does, you can resume
using the camcorder. If the indication remains even
though you repeat the above two or three times,
please consult your nearest JVC dealer.
The charger indicator on the camcorder does
not light.
The temperature of the battery is extremely high/low.
Charging is difficult in places subject to extremely
high/low temperatures.
¥ To protect the battery, it is recommended to charge
it in places with a temperature of 10°C to 35°C
( pg. 48).
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction.
¥ By recording with DIS activated ( pg. 33) this
can be avoided.
When the camcorder is connected via the DV
connector, the camcorder does not operate.
The DV cable was plugged/unplugged with power
turned on.
¥ Turn the camcorders power off and on again, then
operate it.
The memory card cannot be removed from
the camcorder.
¥ Push in the memory card a few more times
( pg. 11).
Coloured bright spots appear all over the LCD
monitor or the viewfinder.
The LCD monitor and the viewfinder are made with
high-precision technology. However, black spots or
bright spots of light (red, green or blue) may appear
constantly on the LCD monitor or the viewfinder.
These spots are not recorded on the tape. This is not
due to any defect of the unit. (Effective dots: more
than 99.99 %)
During recording, sound cannot be heard.
This is normal.
Play, Rewind and Fast-Forward functions do
not work.
The Power Switch @ is set to or .
¥ Set the Power Switch @ to ( pg. 14).
A memory card cannot be played back.
The Power Switch @ is set to or .
¥ Set the Power Switch @ to ( pg. 18).
The VIDEO/MEMORY Switch t is set to VIDEO.
¥ Set the VIDEO/MEMORY Switch t to MEMORY.
The LCD monitor image is distorted.
During playback of the unrecorded portion,
High-speed Search and still playback, LCD monitor
indications appear distorted. This is not a defect.
Images on the LCD monitor are jittery.
The speaker volume is too great.
¥ Turn the speaker volume down ( pg. 14).
There is no playback picture on the
connected TV.
Since the analogue input mode is engaged, the
camcorder is in the Record-Standby mode.
¥ Set S/AV INPUT to OFF in the Menu Screen
( pg. 35).
Blocks of noise appear during playback, or
there is no playback picture and the screen
becomes blue.
¥ Clean the video heads with an optional cleaning
cassette ( pg. 49).
The LCD monitor, the viewfinder and the lens
have become dirty (ex. fingerprints).
¥ Wipe them gently with soft cloth. Wiping strongly
can cause damage ( pg. 50).
01 DX300/100/95/75EK_EN 45-60 2/26/03, 7:13 PM47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX95 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX95

JVC GR-DX95 User Manual - German - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info