39850
34
Zoom out
Zoom in
Previous page
1/60
Next page
EN
34
USING MENUS FOR DETAILED ADJUSTMENT
MELODY
EEPB
RETURN
AM RES E TC
LCD
RIORITYP
ON
EMO MODED
ON
EMOTER
ON
ALLYT
SYSTE
M
SYSTEM
SYSTEM functions which are set when the Power
Switch
@ is set to are also applied when the
Power Switch @ is set to ( pg. 35).
BEEP
OFF: Even though not heard while shooting, shutter
sound is recorded on the tape.
BEEP: The beep sounds when the power is turned on
or off, and at the beginning and end of recording. Also
to activate the shutter sound effect ( pg. 17, 29).
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also activates the
shutter sound effect ( pg. 17, 29).
TALLY
OFF: The tally lamp remains off at all times.
[ON]: The tally lamp comes on to signal the start of
recording.
REMOTE
OFF: Disables the camcorder from receiving the
remote control's beam signals. The camcorder cannot
be operated by the remote control.
[ON]: Enables the camcorder to receive the remote
controls beam signals.
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as
Programme AE with special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:
When the Menu Screen is closed after DEMO
MODE is turned ON.
With DEMO MODE set to ON, if there is no
operation for about 3 minutes after the Power Switch
@ is set to or .
Performing any operation during the demonstration
stops the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be
turned on.
DEMO MODE remains ON even if the camcorder
power is turned off.
If DEMO MODE remains ON, some functions will not
be available. After viewing demo, set to OFF.
PRIORITY
[LCD]: When the LCD monitor is fully open, even if
the viewfinder is pulled out, the image is displayed
only on the LCD monitor; it will not be displayed in the
viewfinder.
FINDER: When the viewfinder is pulled out, even if
the LCD monitor is fully open, the image is displayed
only in the viewfinder; it will not be displayed on the
LCD monitor.
CAM RESET
[RETURN]: Does not reset all settings to the
factory-preset.
EXECUTE: Resets all settings to the factory-preset.
CAMERA DISPLAY
Settings made in the CAMERA DISPLAY Menu
are effective only for video shooting.
Settings made in the CAMERA DISPLAY Menu
remain effective even when the Power Switch @ is set
to . However, the menu settings can be changed
only when the Power Switch @ is set to .
ON SCREEN
LCD: Keeps the camcorders display (except the date,
time and time code) from appearing on the connected
TV screen.
[LCD/TV]: Makes the camcorders display appear on
screen when the camcorder is connected to a TV.
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds
in the following cases:
When the Power Switch @ is set from OFF to
or .
When tape playback starts. The camcorder displays
the date/time when scenes are recorded.
When the date is changed during tape playback.
ON: The date/time is always displayed.
The date indication can also be turned on/off by
pressing the DISPLAY Button U on the remote
control.
[ ] = Factory-preset
RETURN
AREMACD
ISPLAY
LCD / TV
UAOT
IMETDATE /
T I ME CODE
CLOCK
ADJ .
FFO
12.03.52
30:17
RE NEON SC
01 DX300/100/95/75EK_EN 25-34 2/26/03, 7:13 PM34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX95 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX95

JVC GR-DX95 User Manual - German - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info