39850
25
Zoom out
Zoom in
Previous page
1/60
Next page
EN
25
FOR RECORDING
Flash Brightness Adjustment
When a snapshot ( pg. 17, 29) is taken in the dark the
camcorder fires the flash ( Snapshot Flash) and
adjusts the brightness automatically. You can also adjust
the flash brightness manually. When you find that the
snapshots you took look too bright or too dark, adjust it
manually.
1 Perform steps 1 through 3 of Snapshot Flash.
2 Press + or 5 to select FLASH ADJ., and press
SELECT/SET 3. The parameter appears.
3 To intensify the flash, press + 5. To weaken the
flash, press 5.
Adjustment range: 3 to +3.
4 Press SELECT/SET 3. Press + or 5 to select
RETURN and press SELECT/SET 3 twice to
close the Menu Screen.
NOTE:
When you change the subject you are shooting or the
shooting location, set it back to ±0 as described in step 3
and take a snapshot to check the flash brightness. After
doing this adjust to your desired brightness.
Snapshot Flash
The flash can be used when a snapshot is taken in
Record-Standby ( pg. 17, 29).
In Full Auto mode, the flash automatically fires if it is
dark ( T appears).
In Manual mode, you can select the FLASH setting
as follows:
1 Set the Power Switch @ to while pressing
down the Lock Button $ located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2 Press MENU 4. The Menu Screen appears.
3 Press + or 5 to select (MANUAL), and press
SELECT/SET 3.
4 Press + or 5 to select FLASH, and press
SELECT/SET 3. The Sub Menu appears.
5 Press + or 5 to select the desired mode.
AUTO : Fires automatically if it is dark
( T appears).
AUTO : Fires automatically if it is dark
( T appears) and reduces the Red-Eye
effect in the subjects eyes.
ON : Always fires.
OFF : Will not fire.
Press SELECT/SET 3.
6 Press + or 5 to select RETURN. Press
SELECT/SET 3 twice to close the Menu Screen.
If AUTO Is Selected . . .
..... the Red-Eye reduction indicator w lights. Press
SNAPSHOT 9. The flash fires twice. The first flash
is for reduction of the human eyes red reflection and
the second flash is for the actual recording.
NOTES:
Do not fire the flash at a person at short range.
The flash does not fire when the flash is set to OFF in
the Menu Screen, and also when the battery remaining
power is low.
For GR-DX95/DX75 owners ; the flash does not fire when
it is set to AUTO in the Menu Screen with GAIN UP set
to OFF (
pg. 33) and with Programme AE with
special effects set to TWILIGHT ( pg. 27).
When taking several snapshots in succession (Motor
Drive Mode), the flash fires only during the first one.
Although images shot with a flash tend to look whiter than
they actually are, to compensate for this the camcorder
automatically darkens the picture when using the flash.
When shooting a subject at a distance where the flash light
cannot reach (over approx. 2 m), set the flash to OFF to
prevent the picture from becoming too dark or becoming
too tinted.
The colour tone changes depending on the background
lighting conditions, such as under fluorescent or halogen
lamps.
To change the brightness of the flash,
Flash
Brightness Adjustment.
While charging the flash,
T blinks and the flash will
not fire. Although noise may appear, this is not a
malfunction and is not recorded. It can take up to 10
seconds to charge the flash.
3 $
4 5 @
Flash
01 DX300/100/95/75EK_EN 25-34 2/26/03, 7:12 PM25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX95 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX95

JVC GR-DX95 User Manual - German - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages

JVC GR-DX95 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info