39838
32
Zoom out
Zoom in
Previous page
1/52
Next page
FEATURES FOR RECORDING
32 EN
MasterPage: Left
Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.
1 Set the Power Switch to M.
2 Press NIGHT so that the Night-Scope indicator “”
appears.
The shutter speed is automatically adjusted to provide up to
30 times sensitivity.
“” appears beside “” while the shutter speed is being
automatically adjusted.
To deactivate Night-Scope
Press NIGHT again so that the Night-Scope indicator
disappears.
NOTES:
During Night-Scope, the following functions or settings
cannot be activated and its indicator blinks or goes out:
Some modes of Program AE With Special Effects
( pg. 35).
GAIN UP in CAMERA Menu. ( pg. 28)
DIS in MANUAL Menu. ( pg. 28)
During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a tripod is
recommended.
This feature lets you record still images that look like
photographs onto a tape.
1 Set the VIDEO/MEMORY Switch to VIDEO.
(GR-DX97/77/67 only)
2 Set the Power Switch to M.
3 Set SNAP MODE to the desired mode.
( pg. 27, 28)
4 Press SNAPSHOT.
There is the sound effect of a shutter closing.
The O indication appears and a still image will be
recorded for approx. 6 seconds, then the camcorder re-
enters the Record-Standby mode.
You can perform Snapshot also during recording. A still
image will be recorded for approx. 6 seconds, then the
normal recording resumes.
Regardless of the Power Switch position (A or M),
Snapshot recording takes place using the selected
Snapshot mode.
Motor Drive Mode
Keeping SNAPSHOT pressed in step 4 provides an
effect similar to serial photography. (Interval between still
images: approx. 1 second)
The Motor Drive mode is disabled when REC SELECT is
set to / . ( pg. 30)
The camcorders Full Range AF system offers
continuous shooting ability from close-up (as close as
approx. 5 cm to the subject) to infinity.
However, correct focus may not be obtained depending
on the shooting condition. In this case, use the manual
focus mode.
1 Set the Power Switch to M.
2 Press FOCUS. The manual
focus indicator appears.
3 Press or to focus on a
subject.
When the focus level cannot be
adjusted any further or closer,
“” or “” will blink.
4 Press SET. Focus
adjustment is complete.
To reset to Auto Focus
Press FOCUS twice or set the Power Switch to A.
Manual focus is recommended in situations listed
below.
When two subjects overlap in the same scene.
When illumination is low.*
When the subject has no contrast (difference in brightness
and darkness), such as a flat, one-colour wall, or a clear,
blue sky.*
When a dark object is barely visible in the LCD monitor or
the viewfinder.*
When the scene contains minute patterns or identical
patterns that are regularly repeated.
When the scene is affected by sunbeams or light reflecting
off the surface of a body of water.
When shooting a scene with a high-contrast background.
* The following low-contrast warnings appear blinking: ,
, and .
Night Scope
Snapshot (For Video Recording)
Manual Focus
Manual focus indicator
GR-DX97PAL.book Page 32 Tuesday, January 6, 2004 12:44 PM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX48 in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX48

JVC GR-DX48 User Manual - German - 52 pages

JVC GR-DX48 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info