39844
38
Zoom out
Zoom in
Previous page
1/52
Next page
EDITING
38 EN
MasterPage: Left
It is also possible to copy recorded scenes from the
camcorder onto another video unit equipped with a DV
connector. Since a digital signal is sent, there is little if
any image or sound deterioration.
* GR-DX97/77/57/37 only
To use this camcorder as a player
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with
a DV input connector using a DV cable as shown in the
illustration.
3 Start playback on the camcorder. ( pg. 17)
4 At the point you want to start dubbing, start recording
on the video unit. (Refer to the video units instruction
manual.)
5 To stop dubbing, stop recording on the video unit, then
stop playback on this camcorder.
NOTES:
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. ( pg. 11)
If a blank portion or disturbed image is played back on the
player during dubbing, the dubbing may stop so that an
unusual image is not dubbed.
Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4. If this
occurs, turn off the power and make connections again.
If Playback Zoom ( pg. 20) or Playback Special Effects
( pg. 20) is attempted or SNAPSHOT is pressed during
playback, only the original playback image recorded on the
tape is output from the DV IN/OUT connector.
When using a DV cable, be sure to use the optional
JVC VC-VDV204U DV cable.
To use this camcorder as a recorder (GR-DX97/77/57/
37 only)
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with
a DV output connector using a DV cable as shown in the
illustration.
3 Set REC MODE to SP or LP. ( pg. 27, 28)
4 Set the camcorders Power Switch to PLAY.
5 Press the Recording Start/Stop Button to engage the
Record-Pause mode.
The “” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the
Recording Start/Stop Button to start dubbing. The
indication rotates.
8 Press the Recording Start/Stop Button again to stop
dubbing. The indication stops rotating.
NOTES:
If no image is displayed on the LCD monitor, set S/AV
INPUT to OFF. ( pg. 27, 30)
Digital Dubbing is performed in the sound mode recorded
on the original tape, regardless of the current SOUND
MODE setting. ( pg. 28)
Dubbing To Or From A Video Unit
Equipped With A DV Connector (Digital
Dubbing)
Core filter
To DV IN*/OUT
DV cable
(optional)
Video unit equipped with DV connector
To DV IN/OUT
DV. IN
GR-DX97PAL.book Page 38 Tuesday, January 6, 2004 12:44 PM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX27 in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX27

JVC GR-DX27 User Manual - German - 52 pages

JVC GR-DX27 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info