39820
31
Zoom out
Zoom in
Previous page
1/52
Next page
EN 31
MasterPage: Advan_Heading0_Right
ADVANCED FEATURES
SYSTEM
Each setting is linked with “s SYSTEM”, which appears
when the Power Switch is set to “M”.
The parameters are the same as in the description on
page 29.
VIDEO DISPLAY
The “n” (VIDEO DISPLAY) settings are effective only for
video playback except “BRIGHT” and “AUX MIC”.
The parameters (except “OFF” in ON SCREEN settings)
are the same as in the description (CAMERA DISPLAY) on
page 29.
[ ] = Factory-preset
pg. 13, “Brightness Adjustment Of The Display”
When set to “OFF”, the camcorder’s display disappears.
When set to “AUTO”, the date/time are displayed in the
following cases:
When playback starts. The camcorder displays the date/
time when scenes are recorded.
When the date is changed during playback.
pg. 30, “AUX MIC”
BRIGHT
ON SCREEN OFF / [LCD] / LCD/TV
DATE/TIME [OFF] / AUTO / ON
TIME CODE [OFF] / ON
AUX MIC OFF / [ON]
FEATURES FOR RECORDING
LED Light can be used to brighten the
subject in the dark place during video
recording or D.S.C. shooting.
1 Press LIGHT repeatedly to change the
setting.
OFF: Turns off the light.
ON: The light is on always. ( appears.)
AUTO: The light turns on automatically
when dark. ( appears.)
2 Press the Recording Start/Stop Button to start video
recording or SNAPSHOT to shoot a still image.
NOTES:
Be careful not to point the LED Light directly to eyes.
If the light does not reach the subject, the Night-Scope
function will be activated, and makes it possible to shoot
the subject brighter.
There is a difference in the brightness of the images shot
between the centre area which is illuminated by the LED
Light and the surrounding areas (which will be darker).
Since subjects are shot at a reduced shutter speed when
the LED Light setting is “ON”, they will appear slightly
blurred.
Under certain low light conditions the DIS function will not
be available. The “ ” indicator blinks. ( pg. 28)
Once the camcorder is set, the camcorder operator can
become part of the scene in a more natural way, adding
the final touch to a memorable picture.
1 Set the Power Switch to “M”.
2 Set “SELF-TIMER” to “ON ”.
( pg. 27, 28)
The “ ” indicator appears.
3 For video recording, press the
Recording Start/Stop Button.
The tally lamp starts blinking.
After 15 seconds, the beep sounds and video recording
starts. The tally lamp stays on.
To stop Self-Timer recording, press the Recording Start/
Stop Button again.
The camcorder re-enters Record-Standby mode.
OR
3 For snapshot, press SNAPSHOT.
The tally lamp starts blinking.
After 15 seconds, the beep sounds and snapshot recording
starts. The tally lamp turns off. After that, the camcorder re-
enters Record-Standby mode.
4 To end Self-Timer recording, select “OFF” in step 2.
NOTE:
If “BEEP” and “TALLY” are set to “OFF” ( pg. 29), the beep
does not sound and the tally lamp does not light.
LED Light
Self-Timer
LED Light
NU
L MA A
OMEL –TI SE F R FF
NRETUR
O
N
GR-DX317PAL_07Advanced.fm Page 31 Friday, March 5, 2004 6:37 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DX107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DX107 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DX107

JVC GR-DX107 User Manual - German - 52 pages

JVC GR-DX107 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info