595802
70
Zoom out
Zoom in
Previous page
1/84
Next page
70 EN
TROUBLESHOOTING
(Cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
25.
This is a result of
exceedingly high contrast,
and is not a malfunction.
26.
If Audio Dubbing or Insert
Editing have been performed
repeatedly on the same
portion of the tape,
disturbance to the sound
and picture may result.
27.
“DISPLAY” is set to “OFF” in
the Date/Time Menu.
Interface shooting is
performed.
28.
“ON SCREEN” is set to
“OFF” in the Date/Time
Menu.
29.
You have made the
indicators disappear.
30.
•In places subject to low
temperature, images
become dark due to the
characteristics of the LCD
monitor. When this
happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the
camcorder.
When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
31.
The light used to illuminate
the LCD monitor causes it to
become hot.
32.
This may occur when the
surface or the edge of the
LCD monitor is pressed.
33.
The speaker volume is too
great.
34.
————
25.
————
26.
Use a new, or infrequently
used, tape for Audio
Dubbing and Insert Editing
(Z pg. 65, 66).
27.
Set “DISPLAY” to “ON” in
the Date/Time Menu
(Zpg. 11).
During interface shooting,
the date/time does not
appear (Z pg. 23).
Press the IND. ON/OFF
button for longer than 1
second to make the indica-
tors appear (Z pg. 22).
28.
Set “ON SCREEN” to “ON”
in the Date/Time Menu
(Z pg. 33).
Press the IND. ON/OFF
button for longer than 1
second to make the indica-
tors appear (Z pg. 22).
29.
Press the IND. ON/OFF
button for longer than 1
second to make the indica-
tors appear (Z pg. 22).
30.
Adjust the brightness and
angle of the LCD monitor
(Z pg. 22, 23).
31.
Close the LCD monitor to
turn it off or set the Power
Dial to “OFF”, and let the
unit cool down (Z pg. 19).
32.
————
33.
Turn the speaker volume
down (Z pg. 49).
34.
Wipe them gently with soft
cloth. Wiping strongly can
cause damage.
25.
When shooting a subject
illuminated by bright
light, vertical lines appear.
26.
There are disturbances in
audio and video.
27.
During recording, the
date/time does not
appear.
28.
The indicators and
messages do not appear
on screen.
29.
The indicators do not
appear on the LCD
monitor or in the
viewfinder.
30.
Images on the LCD
monitor appear dark or
whitish.
31.
The rear of the LCD
monitor is hot.
32.
The indicators and the
image colour on the LCD
monitor are not clear.
33.
Images on the LCD
monitor are jittery.
34.
The LCD monitor and the
lens have become dirty
(ex. fingerprints).
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVX2 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info