533257
69
Zoom out
Zoom in
Previous page
1/84
Next page
EN 69
Master Page: Right
33. Coloured bright spots appear
all over the LCD monitor or the
viewfinder.
33. The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
33.
34. The indicators and the image
colour on the LCD monitor are
not clear.
34. This may occur when the
surface or the edge of the
LCD monitor is pressed.
34.
35. The cassette will not load
properly.
35. The battery’s charge is low. 35. Install a fully charged battery.
( pg. 10, 11)
36. The memory card cannot be
removed from the camcorder.
36.
36. Push in the memory card a
few more times. ( pg. 16)
37. Picture does not appear on the
LCD monitor.
37. The viewfinder is pulled out
and “PRIORITY” is set to
“FINDER”.
The LCD monitor’s brightness
setting is too dark.
37. Push the viewfinder back in
or set “PRIORITY” to “LCD”.
( pg. 12, 31, 38)
Adjust the brightness of the
LCD monitor. ( pg. 13)
If the monitor is tilted
upward 180 degrees, open
the monitor fully. ( pg. 12)
38. Images on the LCD monitor
are jittery.
38. The speaker volume is too
great.
38. Turn the speaker volume
down. ( pg. 20)
39. The LCD monitor, the
viewfinder and the lens have
become dirty (ex. fingerprints).
39.
39. Wipe them gently with soft
cloth. Wiping strongly can
cause damage. ( pg. 73)
40. Time code does not appear. 40. “TIME CODE” is set to
“OFF”.
40. Set “TIME CODE” to “ON”.
( pg. 31, 38, 41)
41. An error indication (E01, E02
or E06) appears.
41. A malfunction of some kind
has occurred. In this case the
camcorder’s functions
become unusable.
41. pg. 81.
42. An error indication (E03 or
E04) appears.
42. A malfunction of some kind
has occurred. In this case the
camcorder’s functions
become unusable.
42. pg. 81.
43. The remote control does not
work.
43. “REMOTE” is set to “OFF”.
The remote control does not
point at the remote sensor.
The remote control batteries
are exhausted.
43. Set “REMOTE” to “ON”.
( pg. 31, 37)
Point at the remote sensor.
( pg. 54)
Replace the batteries with
fresh ones. ( pg. 54)
REFERENCES
GR-DVP9-8PAL.book Page 69 Friday, February 7, 2003 12:35 PM
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVP8 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info