533257
47
Zoom out
Zoom in
Previous page
1/84
Next page
EN 47
Master Page: Right
To make thumbnail images during video
recording automatically
1
Load a cassette. ( pg. 15)
2 Load a memory card. ( pg. 16)
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
4 Set the Power Switch to “A” orM” while
pressing down the Lock Button located on the
switch.
5 Set “NAVIGATION” to the desired navigation
storing time. ( pg. 31, 35)
If the “ indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
6 Press the Recording Start/Stop Button to start
recording.
When the recording time
is over the navigation
time set in step 5, “
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
If the Recording Start/
Stop button is pressed
before “ stops
blinking, the image of the point where the
loaded memory card is recognised is captured.
7 Press the Recording Start/Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL.
( pg. 31, 35)
3) After the recording, press NAVI STORE.
The “ ” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
NOTES:
The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “ /
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
Load a cassette. ( pg. 15)
2 Load a memory card. ( pg. 16)
3 Set the VIDEO/MEMORY switch to “VIDEO”.
4 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
5 Press NAVI during video playback or stop mode.
The loaded cassette’s
NAVIGATION thumbnail
image screen appears.
Turn the SHUTTLE
SEARCH Ring to the left
(3) to display the
previous page. Turn the
SHUTTLE SEARCH Ring to the right (5) to
display the next page.
6 Press + or to select the desired image, and press
SET/SELECT.
The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring
to the left (3) or to the right (5).
To add thumbnail images during video
playback
1
Perform steps 1 to 4 in “To find scenes on tape
using thumbnail images (NAVIGATION Search)”.
2 Press 4/9 to start video playback.
3 Press NAVI STORE at the desired point.
The “ ” indicator appears briefly and the
image of the point where NAVI STORE is
pressed is stored in the memory card as a
thumbnail image.
To delete thumbnail images
1
Load a memory card. ( pg. 16)
2 Set the VIDEO/MEMORY switch to “VIDEO”.
3 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4 Press MENU. The Menu Screen appears.
5 Press + or to select “t”, and press SET/
SELECT. The VIDEO Menu appears.
PAUSE
PAUSE
PAUSE
1h m1
hm
100
Displayed while the
captured image is
being stored in the
memory card.
TC : 1 3 : 2 3 : 1 5
35 2.4DATE : 2 1.50:329
ONITNAV I GA
1 2 3
4 5 006
ADVANCED FEATURES
CONTINUED ON NEXT PAGE
GR-DVP9-8PAL.book Page 47 Friday, February 7, 2003 12:35 PM
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVP8 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info