533257
40
Zoom out
Zoom in
Previous page
1/84
Next page
40 EN
Master Page: Left-Heading0
PLAYBACK MENUS
VIDEO
Playback sound
During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page 31, select
“SOUND MODE” or “12bit MODE” from the Menu
Screen and set it to the desired parameter.
SOUND MODE (Factory-preset: STEREO )
STEREO : Sound is output on both “L” and “R
channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
12bit MODE (Factory-preset: SOUND 1)
MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
SOUND 1: Original sound is output on both “L
and “R” channels in stereo.
SOUND 2: Dubbed sound is output on both “L
and “R” channels in stereo.
NOTES:
The “SOUND MODE” setting is available for both
12-bit and 16-bit sound. (In previous models’
functions, “12-bit” is called “32 kHz” and “16-bit”
is called “48 kHz”.)
The camcorder cannot detect the sound mode in
which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.
Synchro adjustment
For details, refer to “For More Accurate Editing”
( pg. 61).
SYNCHRO (Factory-preset: ±0.0)
Recording mode
Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. ( pg. 50, 52)
REC MODE (Factory-preset: SP)
SP / LP
NOTE:
“REC MODE” can be set when the Power Switch is
set to “P” or “M”.
Dubbing from tape to memory card
COPY (Factory-preset: OFF)
OFF: Enables snapshots to be taken during tape
playback.
ON: Enables dubbing of images recorded on a
tape to a memory card. ( pg. 53)
Deleting thumbnail images
For details, refer to “To delete thumbnail images”
( pg. 47).
NAVI.DEL.
IMAGE SEL. / TAPE SEL. / ALL / RETURN
Blank search
Helps find a blank portion of tape when you want to
record from the middle of a tape. ( pg. 21)
BLANK SRCH
EXECUTE / RETURN
S-Video/AV input (GR-DVP9 only)
S/AV INPUT (Factory-preset: OFF)
OFF: Enables audio and video signal input from
DV IN/OUT connector. ( pg. 52)
A/V.IN: Enables audio and video signal input
from the S/AV connector. ( pg. 50)
S.IN: Enables audio and S-video signal input from
the S/AV connector. ( pg. 50)
SYSTEM
Each setting is linked with “s”, which appears
when the Power Switch is set to “M”. ( pg. 31) The
parameters are the same as in the description on
page 37.
BEEP (Factory-preset: MELODY)
OFF / BEEP / MELODY
TALLY (Factory-preset: ON)
OFF / ON
REMOTE (Factory preset: ON)
OFF / ON
DEMO MODE (Factory-preset: ON)
OFF / ON
Video Menu
System Menu
GR-DVP9-8PAL.book Page 40 Friday, February 7, 2003 12:35 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVP8 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info