533257
30
Zoom out
Zoom in
Previous page
1/84
Next page
30 EN
Master Page: Left
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 8 in “To Print All Still Images
(One Print For Each)” ( pg. 29).
2 Press + or to select
“CURRENT”, and press
SET/SELECT. The DPOF
screen appears.
3 Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
4 Press + or to select the number indication (00),
and press SET/SELECT.
5 Select the number of prints
by pressing + to increase
the number, or to
decrease the number, and
press SET/SELECT.
Repeat steps 3 through 5
for the desired number
of prints.
The number of prints can be set up to 15.
To correct the number of prints, select the
image again and change the number.
6 Press + or to select
“RETURN”, and press SET/
SELECT. The “SAVE?”
appears.
If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7 Press + or to select “EXECUTE” to save the
setting you have just made, and press SET/
SELECT.
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 8 in “To Print All Still Images
(One Print For Each)” ( pg. 29).
2 Press + or to select “RESET”, and press SET/
SELECT. The DPOF screen appears.
3 Press + or to select “EXECUTE”, and press SET/
SELECT. The normal playback screen appears.
To cancel selection, select “RETURN”.
The number of prints is reset to 0 for all still
images.
You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Press MENU. The Menu
Screen appears.
5 Press + or to select
“FORMAT”, and press
SET/SELECT. The FORMAT
screen appears.
6 Press + or to select
“EXECUTE”, and press
SET/SELECT. The memory
card is initialised.
When initialisation is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND STORED” appears.
To cancel initialisation, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
00
SHEETS
DPOF
05
DPOF
EXECUTE
SAVE?
CANCE L
Initialising A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialisation. If the memory card becomes
corrupted initialise it.
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO . RES E T
FORMAT
ORMA TF
EXECUTE
DATA?EX I ST I NG
ERASE ALL
RETURN
D.S.C. PLAYBACK (cont.)
GR-DVP9-8PAL.book Page 30 Friday, February 7, 2003 12:35 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVP8 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info