584571
52
Zoom out
Zoom in
Previous page
1/68
Next page
52 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
10.
The colour of Snapshot looks
strange.
11.
Although Snapshot is
attempted, flash does not
take place.
12.
Although a Snapshot is taken
with the flash, Red-Eye
Reduction does not take
place.
13.
The image taken using
Snapshot is too dark.
14.
The image taken using
Snapshot is too bright.
10.
The light source or the subject
does not include white. Or
there are various different light
sources behind the subject.
11.
The subject is too bright with
the flash set to “AUTO” or
“AUTO ”.
If blinks, the flash is being
charged.
Multi-Analyser 4 or Multi-
Analyser 9 is selected.
The camcorder is in the
Record mode.
In the Menu Screen, “GAIN
UP” is set to “OFF” or “P.AE/
EFFECT” is set to “TWILIGHT”.
The flash is pushed down.
12.
The subject does not look
straight toward the flash.
The subject does not look at
the first flash, which is an
important part of Red-Eye
Reduction.
The camcorder is too far from
the subject.
“FLASH” is not set to “AUTO
” in the Menu Screen.
13.
The flash is pushed down.
The flash emission window is
covered by fingers, etc..
The flash brightness is set to
produce a darker image
(adjustment value: –3).
The camcorder is too far from
the subject.
Shooting was performed under
backlit conditions.
14.
“FLASH” is set to “ON” in the
Menu Screen.
10.
Set “FLASH” to “ON” in the
Menu Screen. Or find a white
subject and compose your
shot so that it also appears in
the frame (Z pg. 16, 22).
11.
Set “FLASH” to “ON” in the
Menu Screen (Z pg. 22).
It can take up to 10 seconds
to charge the flash.
Disengage Multi-Analyser 4
or Multi-Analyser 9
(Z pg. 17).
Set the camcorder in the
Record-Standby mode
(Z pg. 22).
Set “GAIN UP” to “AUTO
” or “AGC” (Z pg. 19) or
disengage the “TWILIGHT”
mode (Z pg. 25).
Raise the flash using the
FLASH OPEN Switch
(Z pg. 22).
12.
The subject should look
straight toward the flash,
especially the first flash. If the
subject does not see the first
flash, it will be difficult for
Red-Eye Reduction to take
place (Z pg. 22).
The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from
the camcorder (Z pg. 22).
Set “FLASH” to “AUTO
in the Menu Screen to display
the Red-Eye Reduction
indicator (Z pg. 22).
13.
Raise the flash using the
FLASH OPEN Switch
(Z pg. 22).
Do not cover the flash
emission window.
Adjust the flash brightness to
a larger value (Z pg. 23).
The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m
(Z pg. 22).
Press the BACKLIGHT Button
(Z pg. 29).
14.
Set “FLASH” to any
parameter other than “ON” in
the Menu Screen (Z pg. 22).
Push down the flash.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL9200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL9200 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info