584571
28
Zoom out
Zoom in
Previous page
1/68
Next page
28 EN
FOCUS
FOCUS
Focusing
AUTO FOCUS
The camcorders Full Range AF system offers continuous
shooting ability from close-up (as close as approx. 5 cm to
the subject) to infinity. However, correct focus may not be
obtainable in the situations listed below (in these cases use
manual focusing):
When two subjects overlap in the same scene.
When illumination is low.*
When the subject has no contrast (difference in bright-
ness and darkness), such as a flat, one-colour wall, or a
clear, blue sky.*
When a dark object is barely visible in the viewfinder.*
When the scene contains minute patterns or identical
patterns that are regularly repeated.
When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
When shooting a scene with a high-contrast
background.
* The following low-contrast warnings appear blinking:
, , and
MANUAL FOCUS
If you are using the viewfinder, you should already have
made the necessary viewfinder adjustments (
Z
pg. 11).
1
Set the Power Switch to “ ” or “5S” while pressing
down the Lock Button located on the switch, then
pull out the viewfinder fully or open the LCD monitor
fully.
2
Press MENU/BRIGHT. The Menu Screen appears.
3
Rotate MENU/BRIGHT to select “ ”, then press it.
4
Rotate MENU/BRIGHT to select “MANUAL” and
press it. The Menu Screen disappears and “FOCUS”
is displayed. The focus is locked at this point.
5
To focus on a farther subject, rotate MENU/BRIGHT
towards “+”. “ ” appears and blinks.
To focus on a nearer subject, rotate MENU/BRIGHT
towards “–”. “ ” appears and blinks.
6
Press MENU/BRIGHT. Focus adjustment is complete.
The “FOCUS” indication changes to “MANUAL”.
To Return To Auto Focus . . .
.... select “AUTO” in step 4. Or, set the Power Switch to
”.
Focus detection
zone
MENU/BRIGHT
Dial
Power Switch
NOTES:
If the lens is smeared or blurred, accurate
focusing is not possible. Keep the lens clean,
wiping with a piece of soft cloth if it gets
dirty. When condensation occurs, wipe with
a soft cloth or wait for it to dry naturally.
When shooting a subject close to the lens,
zoom out first (
Z
pg. 14). If zoomed-in in
the auto focus mode, the camcorder may
automatically zoom out depending on the
distance between the camcorder and the
subject. This will not occur when “TELE
MACRO” (
Z
pg. 20) is activated.
NOTES:
When the power is turned off, Manual Focus
will be reset to “AUTO”.
Be sure to focus the lens in the maximum
telephoto position when you use the Manual
Focus mode. If you focus in on a subject in
the wide-angle position, sharply focused
images cannot be obtained when zoomed up
because the depth-of-field is reduced at
longer focal lengths.
When the focus level cannot be adjusted
any further or closer, “ ” or “ ” will blink.
While focusing on a
further subject
While focusing on a
nearer subject
RECORDING
Advanced Features (cont.)
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL9200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL9200 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info