595792
21
Zoom out
Zoom in
Previous page
1/92
Next page
EN21
VIDEO PLAYBACK
Power Switch
Rewind Button (
2
)
Fast-Forward
Button (
3
)
Play/Pause Button (
4
/6)
Stop Button (5)
Normal Playback
1
Load a tape ( pg. 12).
2
Set the VIDEO/DSC Switch to VIDEO (GR-DVL915/
DVL815/DVL510 only), then set the Power Switch to
while pressing down the Lock Button located
on the switch. To start playback, press
4
/6.
To stop playback, press 5.
Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards + to
turn up the volume, or towards to turn down the
volume.
NOTES:
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off automati-
cally. To turn on again, set the Power Switch to OFF, then
to .
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
pg. 22).
You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
LCD monitor/viewfinder indications:
When power is supplied from a battery: the
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: does
not appear.
During Stop mode, none of the indications are displayed.
When a cable is connected to the AV connector, the sound
is not heard from the speaker.
Power Zoom Lever (VOL.)
Speaker
Lock Button
Still Playback:
Pauses during playback.
1) Press
4
/6 during playback.
2) To resume normal playback, press
4
/6 again.
If still playback continues for more than about 3 minutes, the camcorders Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorders power is automatically turned off.
When
4
/6
is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
Shuttle Search:
Allows high-speed search in either direction.
1) Press
3
for forward or
2
for reverse search during playback.
2) To resume normal playback, press
4
/6.
During playback, press and hold
2
or
3
. The search continues as long as you hold the button. Once you
release it, normal playback resumes.
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Frame-By-Frame Playback: Allows frame-by-frame search.
1) Engage Still Playback.
2) Rotate the MENU/BRIGHT wheel towards + for forward Frame-By-Frame Playback, or towards for reverse
Frame-By-Frame Playback during Still Playback.
To resume normal playback, press
4
/6.
If you are using the GR-DVL915/DVL815, you can also use the provided remote control for Frame-By-Frame
Playback (
pg. 59).
Slow-Motion Playback/Playback Special Effects (GR-DVL915/DVL815 only)
and Playback Zoom
Available only with the remote control (provided) ( pg. 59, 60).
VIDEO/DSC Switch (GR-DVL915/
DVL815/DVL510 only; open the
LCD monitor to access this switch)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL915 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL915 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info