595793
44
Zoom out
Zoom in
Previous page
1/92
Next page
44 EN
Exposure Control
Manual exposure adjustment is recommended in the
following situations:
When shooting using reverse lighting or when the
background is too bright.
When shooting on a reflective natural background
such as at the beach or when skiing.
When the background is overly dark or the subject
light.
1
Set the Power Switch to while pressing
down the Lock Button located on the switch.
2
Press EXPOSURE. The exposure control
indicator appear.
3
Rotate the MENU/BRIGHT wheel towards +
to brighten the image, or towards to darken
the image. (maximum ±6)
4
Press the MENU/BRIGHT wheel in. Exposure
adjustment is complete.
To Return To Automatic Exposure Control . . .
.... press EXPOSURE twice or set the Power Switch
to . (If EXPOSURE is pressed once, the
camcorder will enter the exposure adjustment
mode again.)
To Brighten The Subject Quickly . . .
.... press BACKLIGHT. is displayed and the
subject is brightened. If pressed again,
disappears and the brightness returns to the
previous level.
+3 exposure has the same effect as the
BACKLIGHT Button.
Using BACKLIGHT may cause the light around the
subject to become too bright and the subject to
become white.
Backlight compensations is also available when the
Power Switch is set to .
Pressing the BACKLIGHT button has no effect
when the manual Exposure Control mode is
engaged.
Iris Lock
Use this function in the following situations:
When shooting a moving subject.
When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder changes),
such as when the subject is backing away.
When shooting on a reflective natural background
such as at the beach or when skiing.
When shooting objects under a spotlight.
When zooming.
When the subject is close, keep the iris locked. Even
when the subject moves away from you, the image
will not darken or brighten.
Before the following steps, perform steps 1 and 2 of
Exposure Control.
3
Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
the MENU/BRIGHT wheel for over 2 seconds.
The exposure control indicator and
appear.
Press the MENU/BRIGHT wheel in.
changes to and the iris is locked.
To Return To Automatic Iris Control . . .
.... press EXPOSURE twice so that the exposure
control indicator and disappear. Or, set the
Power Switch to .
To Lock The Exposure Control And The Iris . . .
.... after step 2 of Exposure Control, adjust the
exposure rotating the MENU/BRIGHT wheel.
Then lock the iris in step 3 of Iris Lock. For
automatic locking, press EXPOSURE twice in
step 2. The iris becomes automatic after about
2 seconds.
Iris
Like the pupil of the human eye, it contracts in well-
lit environments to keep too much light from
entering, and dilates in dim environments to allow in
more light.
FOR RECORDING
(cont.)
3
P
L
A
Y
O
F
F
MENU/BRIGHT Wheel
Power Switch
BACKLIGHT Button (
3
)
EXPOSURE
Button (
2
)
Iris lock indicator
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL815 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info