39748
49
Zoom out
Zoom in
Previous page
1/88
Next page
EN
49
: Factory-preset
NOTES:
SYSTEM and DISPLAY functions which are set when the Power Switch is set to
M
ANUAL
are also applied
when the Power Switch is set to PLAY (
pg. 50). CLOCK ADJ. only appears when the Power Switch is set to
MANUAL
.
Settings made in the DISPLAY Menu remain effective even when the Power Switch is set to
AUTO
. However,
the menu settings can be changed only when the Power Switch is set to
M
ANUAL
.
The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided)
(
pg. 23, 52, 59).
SYSTEM
DISPLAY
DEMO
MODE
CAM
RESET
ON
SCREEN
DATE/
TIME
TIME
CODE
CLOCK ADJ.
/
Refer to Picture Quality/Image Size Setting ( pg. 14).
When Snapshot recording is performed with the VIDEO/MEMORY Switch set
to VIDEO, still images are recorded only onto the tape.
When Snapshot recording is performed with the VIDEO/MEMORY Switch set
to VIDEO, still images are recorded not only onto the tape but also on the
memory card (640 x 480 pixels). In this mode, the SNAP MODE selection in
the CAMERA Menu is also applicable to memory card recording.
QUALITY
IMAGE SIZE
REC
SELECT
(GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only)
DSC
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special effects,
etc., and can be used to confirm how these functions operate.
Demonstration starts in the following cases:
When the Menu Screen is closed after DEMO MODE is turned ON.
With DEMO MODE set to ON, if there is no operation for about 3 minutes
after the Power Switch is set to
AUTO
or
MANUAL
.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
DEMO MODE remains ON even if the camcorder power is turned off.
If DEMO MODE remains ON, some functions will not be available. After
viewing demo, set to OFF.
The Side LED indicator ( p. 80, 81) lights on the camcorder when the Power
Switch is set to
AUTO
or
MANUAL
.
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Keeps the camcorders display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorders display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
When the Power Switch is set from OFF to
AUTO
or
M
ANUAL
.
When tape playback starts. The camcorder displays the date/time when
scenes are recorded.
When the date is changed during tape playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time ( pg. 11).
OFF
ON
ON
OFF
CANCEL
EXECUTE
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
SIDE LED
(GR-DVL867/
DVL865/DVL767/
DVL765 only)
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL167 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL167 in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DVL167

JVC GR-DVL167 User Manual - German - 88 pages

JVC GR-DVL167 User Manual - Dutch - 88 pages

JVC GR-DVL167 User Manual - Dutch - 88 pages

JVC GR-DVL167 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info