452693
41
Zoom out
Zoom in
Previous page
1/98
Next page
EN41
PLAYBACK
Advanced Features For Video
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
COP Y
STEREO
SOUND
1
SP
OFF
OFF
NRETUR
O.O
Using Menus For Detailed Adjustment
The following procedure applies to all except
Synchro
Comp (
pg. 69, 70).
1
Set the Power Switch to while pressing down
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select
1
RETURN and
press it twice to close the Menu Screen.
Display
Power Switch
MENU Wheel
pg. 42.
pg. 42.
pg. 70.
Allows you to set the video recording
mode (SP or LP) depending on your
preference (
pg. 15).
It is recommended you use REC
MODE in the
VIDEO Menu
when using this camcorder as a
recorder during dubbing
( pg. 58, 59).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
pg. 60).
OFF: Enables snapshots to be taken
during video playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
pg. 58).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the AV
and S-VIDEO connectors
( pg. 54, 58).
Makes a beep or melody sound/
activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Makes the camcorders indications
appear/disappear from the
connected TV screen.
Makes the date/time appear/
disappear on the camcorder.
Makes the time code appear/
disappear on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
BEEP*
TALLY*
DEMO MODE*
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
Lock Button
Recording Start/Stop Button
* Each setting is linked with DISPLAY or
SYSTEM, which appears when the
Power Switch is set to ( pg. 31). The
parameters are the same as in the description
on pg. 31.
NOTES:
It is also possible to change the ON SCREEN
settings by pressing DISPLAY on the remote
control (provided).
REC MODE can be set when the Power
Switch is set to or (
pg. 15, 29).
When S/AV INPUT is set to ON,
camcorder playback cannot be viewed on
the AV output.
VIDEO
DISPLAY
SYSTEM
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DV2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DV2000 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DV2000

JVC GR-DV2000 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info