452693
31
Zoom out
Zoom in
Previous page
1/98
Next page
EN31
: Factory-preset
BEEP Even though not heard while shooting, shutter sound is recorded on the tape.
The beep sounds when the power is turned on or off, and at the beginning and end
of recording. Also to activate the shutter sound effect ( pg. 20, 21).
Instead of a beep, a melody sounds when any operation is performed. It also
activates the shutter sound effect ( pg. 20, 21).
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
Automatic demonstration will not take place.
Demonstrates certain functions such as Program AE with special effects, etc.,
and can be used to confirm how these functions operate. When DEMO
MODE is set to ON and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
DEMO MODE remains ON even if the camcorder power is turned off.
If DEMO MODE remains ON, some functions will not be available.
After viewing demo, set to OFF.
Keeps the camcorders display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorders display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
When the Power Switch is set from OFF to or .
When video playback starts. The camcorder displays the date/time when
scenes are recorded.
When the date is changed during video playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time ( pg. 11).
Refer to Picture Mode Setting ( pg. 16).
NOTES:
SYSTEM and DISPLAY functions which are set when the Power Switch is set to are also
applied when the Power Switch is set to (
pg. 41). CLOCK ADJ. only appears when the Power
Switch is set to .
The DISPLAY settings are effective even when the Power Switch is set to .
The ON SCREEN setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
pg. 55, 58, 66).
SYSTEM
OFF
BEEP
MELODY
OFF
ON
OFF
ON
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
TIME
CODE
CLOCK ADJ.
QUALITY
SIZE
UXGA
DSC
DISPLAY
DATE/
TIME
ON
SCREEN
TALLY
DEMO
MODE
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DV2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DV2000 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DV2000

JVC GR-DV2000 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info