452692
32
Zoom out
Zoom in
Previous page
1/96
Next page
32 EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Fade/Wipe Effects
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next. You can also vary
transitions from scene to scene.
IMPORTANT:
Some Fade/Wipe Effects cannot be used with
certain modes of Programme AE with special
effects (
pg. 34, 35). If an unusable Fade/
Wipe Effect is selected, its indicator blinks or
goes out.
Recording Start/
Stop Button
MENU Wheel
Power Switch
FADE/WIPE SELECTION
( , , , , , , , and )
Fade or Wipe works when video recording is started or
when you stop recording.
1
Set the Shooting Mode Switch to VIDEO and set the
Power Switch to while pressing down the Lock
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Set CAMERA MODE to VIDEO or PS-VIDEO in
the Menu Screen ( pg. 26, 27).
4
Rotate the MENU wheel to select FADER/WIPE,
then press it. Rotate the MENU wheel to select the
desired function, then press it. Selection is complete.
5
Press the MENU wheel again. The Menu Screen
closes.
6
To activate the Fade-in or Wipe-in . . .
.... Press FADE/WIPE during Record-Standby mode
so that the selected effect indicator appears.
To activate the Fade-out or Wipe-out . . .
.... Press FADE/WIPE during recording so that the
selected effect indicator appears.
7
Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.
PICTURE WIPE OR DISSOLVE SELECTION
( , , , , , and )
The Picture Wipe or Dissolve works when video recording
is started.
1
Follow steps 1 through 5 above.
2
Engage the Record-Standby mode.
If you press FADE/WIPE during recording . . .
.... press the Recording Start/Stop Button when one
scene is finished. The point at which the scene
ended is stored in memory.
If you press FADE/WIPE during Record-Standby
mode . . .
.... press the Recording Start/Stop Button to start
recording and press it again when one scene is
finished. The point at which the scene ended is
stored in memory.
3
If you start recording a new scene within 5 minutes of
the end of the previous recording (without having
turned the camcorders power off), the previous scene
wipes out, revealing the new scene.
To Deactivate The Selected Effect . . .
.... press FADE/WIPE again in step 6 so that
the effect indicator disappears.
NOTES:
Once a Fade/Wipe Effect is executed, the effect is
deactivated and its indicator goes out. To use the
same effect again, press FADE/WIPE as required.
To use a different effect, start from step 4.
You can extend the length of a Fade or Wipe by
pressing and holding the Recording Start/Stop
Button.
If the power is turned off after a scene is finished
recording, the stored point is erased,
disabling the Picture Wipe/Dissolve combina-
tion. When this happens, the Picture Wipe/
Dissolve indicator blinks. Also note that power
shuts off automatically if 5 minutes elapse in the
Record-Standby mode.
Picture Wipe/Dissolve cannot be used when
CAMERA MODE is set to PS-VIDEO.
All Fade/Wipe Effects cannot be used when
CAMERA MODE is set to DUAL.
The sound at the end of the last recorded scene
is not stored.
Shooting Mode Switch
FADE/WIPE Button
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DV1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DV1800 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DV1800

JVC GR-DV1800 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info