452692
19
Zoom out
Zoom in
Previous page
1/96
Next page
EN19
UXGA F I NE
10 / 24
RECORDING
Basic Recording For Digital Still Camera (D.S.C.)
Basic Shooting (Snapshot)
You can use your camcorder as a Digital Still Camera for
taking snapshots.
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power (
pg. 6)
Grip Adjustment (
pg. 8)
Viewfinder Adjustment (
pg. 8)
Loading A Memory Card (
pg. 11)
Picture Mode Setting (
pg. 14)
1
Set the Shooting Mode Switch to XGA/VGA or UXGA,
then set the Power Switch to or while pressing
down the Lock Button located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2
Press SNAPSHOT halfway. The screen becomes a still
image, which is captured into the camcorders memory.
However, it is not recorded until SNAPSHOT is pressed
fully.
At this moment, if you release SNAPSHOT, snapshot
recording will be cancelled.
3
Press SNAPSHOT fully.
The image is recorded in the memory card .
Still images are recorded in the snapshot mode with no
frame.
To Delete Unwanted Still Images . . .
..... when unwanted still images are stored in the memory
card or its memory is full, refer to Deleting Images
( pg. 45) and delete unwanted still images.
To Remove The Shutter Sound . . .
..... when you do not want to hear the shutter sound, set
BEEP to OFF in the Menu Screen ( pg. 26, 29). The
sound is no longer heard from the speaker.
NOTES:
Even if DIS is set to ON (
pg. 27), the Stabiliser will
be disabled.
If Snapshot recording is not possible, PHOTO blinks when
SNAPSHOT is pressed.
If Programme AE with special effects (
pg. 34) is engaged,
certain modes of Programme AE with special effects are
disabled during Snapshot recording. In such a case, the icon
blinks.
If shooting is not performed for approx. 5 minutes when the
Power Switch is set to or and power is supplied
from the battery pack, the camcorder shuts off automatically
to save power. To perform shooting again, close the LCD
monitor and re-open it. When using the viewfinder, push
back it in and pull it out again.
The Motor Drive mode (
pg. 18) is disabled when the
Shooting Mode Switch is set to XGA/VGA or UXGA.
When a headphone set is connected to the PHONE
connector, the shutter sound is not heard from the speaker.
Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any compatibility
with devices which are not compliant to DCF.
In the XGA mode, images shot using a 680,000-pixel
Progressive Scan CCD (effective area: 630,000 pixels, 962 x
654 pixels) are converted and stored in the XGA mode file
size (1024 x 768 pixels).
Power Switch
Lock Button
Number of shots taken
Displays the number of images
that have already been shot.
Display
Shooting icon
Appears and blinks during shooting.
Shooting
Mode Switch
Snapshot mode
with no frame
There is the sound of a shutter closing.
Picture Size
Displays the file size of the stored image: UXGA, XGA
or VGA (
pg. 14).
UXGA Mode icon
Displays the process utilized to create the UXGA size
image:
(DOUBLE) or (ENLARGE) ( pg. 14).
Card icon
Appears during shooting and blinks when a
memory card is not loaded.
Total number of shots
Displays the approximate total number of
shots that can be stored, including those
already taken. The number increases or
decreases depending on the shots stored,
the Picture mode, Shooting mode, etc.
Picture Quality
Displays the quality of the stored image: FINE or
STD (standard) (in order of quality) (
pg. 14).
SNAPSHOT
Button
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DV1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DV1800 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DV1800

JVC GR-DV1800 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info