595789
32
Zoom out
Zoom in
Previous page
1/84
Next page
ADDITIONAL FEATURES FOR D.S.C.
32 EN
MasterPage: Left
Still images can be dubbed from a tape to a
memory card.
1 Load a cassette. ( pg. 17)
2 Load a memory card. ( pg. 18)
3 Set “SNAP/SLOW” to the desired mode.
(except “SLOW”, pg. 36, 37)
4 Set the VIDEO/MEMORY Switch to “VIDEO”.
5 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
6 Set “ COPY” to “ON”.
( pg. 36, 41)
7 Press 4/9 to start playback.
8 At the point you want to dub, press 4/9
again to engage Still Playback.
9 To dub the image, press SNAPSHOT.
The “ ” indication appears during dubbing.
NOTES:
To use Playback Special effects with a video
image you wish to dub, perform up to step 9 using
the remote control. ( pg. 26)
Images are dubbed in 640 x 480 pixels.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1 To reset the file name...
...for images, display its playback screen.
( pg. 29)
...for video clips, display its playback screen.
( pg. 29)
2 Press MENU. The Menu Screen appears.
3 Press or to select “NO. RESET”, and
press SET. The NO. RESET screen appears.
4 Press or to select “EXECUTE”, and press
SET. The new folder (such as “101JVCGR”) will
be made and the file name of the next shot
starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The Protect mode helps prevent the accidental
erasure of files.
1 To protect the file...
...for images, display its playback screen.
( pg. 29)
...for video clips, display its playback screen.
( pg. 29)
2 Press MENU. The Menu Screen appears.
3 Press or to select “PROTECT”, and press
SET. The Sub Menu appears.
To protect the currently displayed file
4 Press or to select
“CURRENT”, and press
SET. The PROTECT
screen appears.
5 Press < or > to select
the desired file.
6 Press or to select
“EXECUTE”, and press
SET.
To cancel protection,
select “RETURN”.
Repeat steps 5 and 6 for
all files you want to
protect.
To protect all files stored in the memory card
4 Press or to select “PROT.ALL”, and press
SET. The PROTECT screen appears.
5 Press or to select “EXECUTE”, and press
SET.
To cancel protection, select “RETURN”.
NOTES:
If the “ ” mark appears, the currently displayed
file is protected.
When the memory card is initialized or corrupted,
even protected files are deleted. If you do not
want to lose important files, transfer them to a PC
and save them.
Dubbing Still Images Recorded On
A Tape To A Memory Card
Resetting The File Name
Protecting Files
PROTECT
M
E
NU
RENT
PROT.ALL
CANC.ALL
RETURN
CUR
ROTECTP
RETURN
PROTECTED
GR-DF550US.book Page 32 Thursday, February 24, 2005 11:17 AM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DF430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DF430 in the language / languages: English as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info