56757
34
Zoom out
Zoom in
Previous page
1/40
Next page
34 EN
Troubleshooting
* The camcorder turns off automatically. Re-check if the indication clears. When it does, you can resume
using the camcorder. If the indication remains, consult your nearest JVC dealer.
Problem Possible Cause Remedy
The POWER/CHARGE lamp
on the camcorder does not
light during charging.
Charging is difficult in places
subject to extremely high/low
temperatures.
The battery pack is not
attached firmly.
H
To protect the battery, it is
recommended to charge it in places
with a temperature of 10°C to 35°C.
(
35)
H
Detach the battery pack once again
and re-attach it firmly. (
13)
The tape is moving, but there
is no picture.
Your TV has AV input
terminals, but is not set to its
VIDEO mode.
The cassette holder cover is
open.
H
Set the TV to the mode or channel
appropriate for video playback. (
20)
H
Close the cassette holder cover.
(
15)
Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.
H
Clean the video heads with an optional
cleaning cassette.
Data battery status does not
appear.
The AC Adapter is
connected to the camcorder.
The camcorder turned off
automatically.
H
Disconnect the AC adapter from the
camcorde r.
H
Turn the camcorder off, then on again.
Warning Indication Meaning / Remedy
Displays the battery remaining power.
As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted, power turns off
automatically.
SET TO MANUAL MODE
Appears when you attempt to change “Menu Settings”, “Backlight
Compensation” or “Manual Focus” while in AUTO mode
A
. (
11)
TAPE END
Appears when the tape ends during recording or playback.
LENS CAP
Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME!
Appears when the date/time is not set. (
14)
The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
Appears if a tape is loaded while the Power Switch is set to
“REC”
.
Blinks when no tape is loaded.
CHECK TAPE’S ERASE
PROTECTION TAB
Appears when the erase protection tab is set to “SAVE” while the
Power Switch is set to
“REC”
.
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY OR
DC PLUG
Error indications (01, 02 or 06).
Remedy: Remove and reattach the power supply or battery*.
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
Error indications 03 or 04.
Remedy: Eject the cassette and re-insert*.
High
Exhausted
GR-DA20EK.book Page 34 Thursday, August 2, 2007 12:08 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DA20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DA20 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DA20

JVC GR-DA20 User Manual - German, Dutch, French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info