23029
28
Zoom out
Zoom in
Previous page
1/56
Next page
EN
28
USING MENUS FOR DETAILED ADJUSTMENT
For Recording Menu
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the
more detailed camcorder settings ( pg. 28 31).
1 Set the Power Switch y to while pressing
down the Lock Button t located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2 Press the MENU/VOLUME wheel % in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel % to select the
desired function menu, and press it.
4 Function menu setting depends on the function.
If you have selected WIPE/FADER,
PROGRAM AE, EXPOSURE or
W. BALANCE . . .
..... see the column on the right.
If you have selected CAMERA, MANUAL,
SYSTEM, CAMERA DISPLAY or
DSC . . .
..... go to step 5.
5 Rotate the MENU/VOLUME wheel % to select the
desired function and press it. The Sub Menu appears.
Then, rotate the MENU/VOLUME wheel % to select
the parameter, and press it. Selection is complete.
6 Rotate the MENU/VOLUME wheel % to select
RETURN and press it twice. The Menu Screen
closes.
The icon represents END.
NOTE:
When the Menu Screen is left on for a couple of minutes, a
residual image may be left on the screen and it may take
several seconds for the residual image to disappear. This is
not due to any defect of the unit.
WIPE/FADER
Refer to Fade/Wipe Effects ( pg. 24).
PROGRAM AE
Refer to Program AE With Special Effects ( pg. 23).
EXPOSURE
Refer to Exposure Control and Iris Lock ( pg. 26,
27).
W.BALANCE
Refer to White Balance Adjustment and Manual
White Balance Operation ( pg. 27).
CAMERA
Settings made in the CAMERA Menu remain
effective whether the Power Switch y is set to or
. However, the menu settings can be changed only
when the Power Switch y is set to .
REC MODE
Allows you to set the tape recording mode ([SP] or LP)
depending on your preference ( pg. 10).
SOUND MODE
[12BIT]: Enables tape recording of stereo sound on
four separate channels, and is recommended for use
when performing audio dubbing. (Equivalent to the
32 kHz mode of previous models)
16BIT: Enables tape recording of stereo sound on
two separate channels. (Equivalent to the 48 kHz
mode of previous models)
ZOOM
16X: When set to 16X while using digital zoom, the
zoom magnification will reset to 16X since digital
zoom will be disengaged.
[40X]: Allows you to use the Digital Zoom. By digitally
processing and magnifying images, zooming is
possible from 16X (the optical zoom limit), to a
maximum of 40X digital magnification.
700X: Allows you to use the Digital Zoom. By digitally
processing and magnifying images, zooming is
possible from 16X (the optical zoom limit), to a
maximum of 700X digital magnification.
SNAP MODE
Refer to Snapshot (For Tape Recording) ( pg. 25).
[ ] = Factory-preset
EC MODER
RETURN
AGC
AIN UPG
FULL
NAP MODES
40
X
OOMZ
12
BIT
OUND MODES
MACER
A
1 GR-D90/70/30US EN 23-34 02.11.6, 3:13 PM28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D90 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info