23027
22
Zoom out
Zoom in
Previous page
1/56
Next page
EN
22
5 Select the number of prints by rotating the MENU/
VOLUME wheel % and press it.
Repeat steps 3 through 5 for the desired number of
prints.
The number of prints can be set up to 15.
To correct the number of prints, select the image
again and change the number.
6 Rotate the MENU/VOLUME wheel % to select
RETURN and press it. Selection is complete. SAVE?
appears.
If you did not change any settings in step 3 through 5,
the Menu Screen reappears.
7 Rotate the MENU/VOLUME wheel % to select
EXECUTE, then press it to save the setting you have
just made.
To cancel selection, rotate the MENU/VOLUME wheel
% to select CANCEL and press it.
To Reset The No. Of Prints . . .
..... select RESET in step 4 of TO PRINT ALL STILL
IMAGES (ONE PRINT FOR EACH) on pg. 21.
The number of prints is reset to 0 for all still
images.
CAUTION
While performing the above, never disconnect power,
as this may cause the memory to be corrupted. For
safety, all buttons including the Power Switch y are
disabled in step 6.
NOTES:
BATTERY LOW appears if the battery remaining power
is too low.
If you load a memory card already set as shown above in
a printer compatible with DPOF, it will make prints of the
selected still images automatically.
To print images recorded on a tape, first dub them to a
memory card (
pg. 21).
Making A New Folder
New still pictures you are going to take can be
separated from previously shot pictures by resetting the
file name to DVC00001; these new pictures will be
stored in a new folder.
1 Set the VIDEO/DSC Switch 4 to DSC, then set
the Power Switch y to PLAY while pressing down the
Lock Button t located on the switch.
A stored file is displayed.
2 Press the MENU/VOLUME wheel % in. The Menu
Screen appears. Rotate the MENU/VOLUME wheel %
to select NO. RESET, then press it. The NO. RESET
Screen appears.
3 Rotate the MENU/VOLUME wheel % to select
EXECUTE, then press it. The new folder (such as
101JVCGR) will be made and the file name of the
next shot starts from DVC00001.
Initializing A Memory Card
You can initialize a memory card anytime.
After initializing, all files and data stored on the
memory card, including those which have been
protected, are cleared.
1 Perform step 1 of Making A New Folder.
2 Press the MENU/VOLUME wheel % in. The Menu
Screen appears. Rotate the MENU/VOLUME wheel %
to select FORMAT and press it. The FORMAT Screen
appears.
3 Rotate the MENU/VOLUME wheel % to select
EXECUTE and press it. The memory card is
initialized. When initialization is finished, NO IMAGES
STORED appears.
To cancel initialization, rotate the MENU/VOLUME
wheel % to select RETURN and press it.
CAUTION
Do not perform any other operation (such as turning off
the camcorder) during initialization. Also, be sure to use
the provided AC Adapter, as the memory card may be
corrupted if the battery becomes exhausted during
initialization. If the memory card becomes corrupted
initialize it.
Folder and File names
Each time shooting takes place, a file name is made
using a number which is larger by one than the
largest number of the file names which are in use.
Even if you delete an image file with a number in
the middle of range, the number will not be used for
a new shot; a gap will remain in the numerical
sequence. If the file name reaches DVC09999, a
new folder (such as 101JVCGR) will be made and
the file name will start again from DVC00001.
ADVANCED FEATURES
(GR-D90 and GR-D70 only)
1 GR-D90/70/30US EN 17-22 02.11.6, 3:11 PM22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D70 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D70

JVC GR-D70 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info