Manual JVC GR-D60 (page 36 of 56) (English)

471637

Zoom out

Zoom in

1/56

USING THE REMOTE CONTROL UNIT

Audio Dubbing

The audio track can be customized only when recorded

in the 12-bit mode (੬ pg. 28).

NOTES:

● Audio Dubbing is not possible on a tape recorded in

16-bit audio, on a tape recorded in the LP mode or on a

blank portion of a tape.

● To perform Audio Dubbing while watching on the

television, make connections (੬ pg. 16).

1 Play back the tape to locate the point where editing

will start, then press PAUSE (6) U.

2 While holding A.DUB (e) l on the remote control,

press PAUSE (6) U. “6e” E and “MIC” (GR-D70 only)

appear.

3 Press PLAY (

) k, then begin “narrating”.

Speak into the microphone.

• To pause dubbing, press PAUSE (6) U.

4 To end Audio Dubbing, press PAUSE (6) U, then

STOP (5) a.

To hear the dubbed sound during playback . . .

..... set “12BIT MODE” to “SOUND 2” or “MIX” in the

Menu Screen (੬ pg. 32).

NOTES:

● Sound is not heard from the speaker during Audio

Dubbing.

● When editing onto a tape that was recorded at 12-bit, the

old and new soundtracks are recorded separately.

● If you dub onto a blank space on the tape, the sound may

be disrupted. Make sure you only edit recorded areas.

● If feedback or howling occurs during TV playback, move

the camcorder’s microphone away from the TV, or turn

down the TV’s volume.

● If you change from 12-bit to 16-bit in mid-recording and

then use the tape for Audio Dubbing, it is not effective

from the point where 16-bit recording began.

● During Audio Dubbing, when the tape moves to scenes

recorded in the LP mode, scenes recorded in 16-bit audio

or a blank portion, Audio Dubbing stops (

੬ pg. 52).

● To perform Audio Dubbing with a video unit connected to

the camcorder’s AV connector, first set “S/AV INPUT” to

“ON” in the Menu Screen (GR-D70 only,

੬ pg. 31).

“AUX” appears instead of “MIC”.

Insert Editing

You can record a new scene into a previously recorded

tape, replacing a section of the original recording with

minimal picture distortion at the in and outpoints. The

original audio remains unchanged.

NOTES:

● Before performing the following steps, make sure that

“TIME CODE” is set to “ON” in the Menu Screen

(

੬ pg. 31, 32).

● Insert Editing is not possible on a tape recorded in the LP

mode or on a blank portion of a tape.

● To perform Insert Editing while watching in the television,

make connections (੬ pg. 16).

1 Play back the tape, locate the Edit-Out point and

press PAUSE (6) U. Confirm the time code at this

point (੬ pg. 31, 32).

2 Press REW (

) O until the Edit-In point is located,

then press PAUSE (6) U.

3 Press and hold INSERT (w) P on the remote

control, then press PAUSE (6) U. “6w” 8 and the

Time Code (min.:sec.) appear and the camcorder

enters Insert-Pause mode.

4 Press START/STOP d to begin editing.

• Confirm the insert at the time code you checked in

step 1.

• To pause editing, press START/STOP d. Press it

again to resume editing.

5 To end Insert Editing, press START/STOP d, then

STOP (5) a.

NOTES:

● Programme AE with special effects (੬ pg. 23) can be

used to spice up the scenes being edited during Insert

Editing.

● During Insert Editing, the date and time information

changes.

● If you perform Insert Editing onto a blank space on the

tape, the audio and video may be disrupted. Make sure

you only edit recorded areas.

● During Insert Editing, when the tape moves to scenes

recorded in the LP mode or a blank portion, Insert Editing

stops (

੬ pg. 52).

Stereo microphone

;

01 GR-D70/60EK 35-40 02.12.4, 17:1836

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D60 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D60

JVC GR-D60 User Manual - German - 56 pages

JVC GR-D60 User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC GR-D60 Manual

Product: