533227
34
Zoom out
Zoom in
Previous page
1/48
Next page
EN
34
TROUBLESHOOTING
The focus does not adjust automatically.
Focus is set to the Manual mode.
¥ Set Focus to the Auto mode ( pg. 19).
The recording was done in a dark place, or the
contrast was low.
The lens is dirty or covered with condensation.
¥ Clean the lens and check the focus again
( pg. 38).
The cassette will not load properly.
The cassette is in the wrong position.
¥ Set it in the right position ( pg. 9).
The battery’s charge is low.
¥ Install a fully charged battery (
pg. 7, 8).
Snapshot mode cannot be used.
The Squeeze mode is selected.
¥ Disengage the Squeeze mode ( pg. 22).
The colour of Snapshot looks strange.
The light source or the subject does not include white.
Or there are various different light sources behind the
subject.
¥ Find a white subject and compose your shot so that
it also appears in the frame ( pg. 18).
The Sepia or Monotone mode is activated.
¥ Turn off Sepia and Monotone ( pg. 16).
The image taken using Snapshot is too dark.
Shooting was performed under backlit conditions.
¥ Press the BACKLIGHT Button 0 ( pg. 19).
The image taken using Snapshot is too bright.
The subject is too bright.
¥ Set “PROGRAM AE” to “SPOTLIGHT” in the Menu
Screen ( pg. 16).
Digital Zoom does not work.
16X optical zoom is selected.
¥ Set “ZOOM” to “40X” or “700X” in the Menu Screen
( pg. 21).
The Black & White Fader does not work.
The Sepia or Monotone mode is activated.
¥ Turn off Sepia and Monotone ( pg. 16).
Before consulting your JVC dealer, please check the
following to see it you can correct the problem yourself.
The camcorder is a microcomputer-controlled
device. External noise and interference (from a TV,
a radio, etc.) might prevent it from functioning
properly. In such cases, first disconnect its power
supply unit (battery pack, AC Adapter, etc.) and wait
a few minutes; and then re-connect it and proceed
as usual from the beginning.
No power is supplied.
The power is not connected properly.
¥ Connect the AC Adapter securely ( pg. 7).
The battery is dead.
¥ Replace the dead battery with a fully charged one
( pg. 7, 8).
“SET DATE/TIME!” appears.
The date/time is not set.
¥ Set the date/time ( pg. 10).
The built-in clock battery has run out and the
previously set date/time has been erased.
¥ Consult your nearest JVC dealer for replacement.
Recording cannot be performed.
The tape’s erase protection tab is set to “SAVE”.
¥ Set the tape’s erase protection tab to “REC”
( pg. 9).
The Power Switch y is set to “PLAY” or “OFF
(CHARGE)”.
¥ Set the Power Switch y to or “ ” ( pg. 12).
“TAPE END appears.
¥ Replace with new cassette ( pg. 9).
The cassette holder cover is open.
¥ Close the cassette holder cover.
There is no picture.
The camcorder is not getting power, or some other
malfunction exists.
¥ Turn the camcorder’s power off and on again
( pg. 12).
01 D50/40/30/20EK 34-48 02.12.4, 19:2234
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D40 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D40

JVC GR-D40 User Manual - German - 48 pages

JVC GR-D40 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info