663421
49
Zoom out
Zoom in
Previous page
1/88
Next page
EN
ENEN
EN

"'
"'"'
"'
Master Page: Right
The NAVIGATION SEARCH indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press PLAY (4/9), REW (3), FF (5) or STOP
(8).
To add thumbnail images during video
playback
1
Perform steps 1 to 4 in To find scenes on tape
using thumbnail images (NAVIGATION Search).
2
Press PLAY (4/9) to start video playback.
3
Press NAVI STORE at the desired point.
The “” indicator appears briefly and the
image of the point where NAVI STORE is
pressed is stored in the memory card as a
thumbnail image.
To delete thumbnail images
1 Load a memory card. ( pg. 16)
2
Set the VIDEO/MEMORY switch to VIDEO.
3
Set the Power Switch to PLAY while pressing
down the Lock Button located on the switch.
4
Press MENU. The Menu Screen appears.
5
Press + or to select t, and press SELECT/
SET. The VIDEO Menu appears.
6
Press + or to select
NAVI.DEL., and press
SELECT/SET. The Sub
Menu appears.
7
By pressing + or ...
Select IMAGE SEL. to
delete the currently displayed thumbnail image.
Select TAPE SEL. to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select ALL to delete all thumbnail images
stored in the memory card at once.
8
Press SELECT/SET. The
NAVIGATION screen
appears.
9
Press + or to select
EXECUTE, and press
SELECT/SET.
Press REW (3) to display the previous
image. Press FF (5) to display the next
image.
To cancel deletion, select RETURN.
Thumbnail images cannot be deleted during
video playback.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Adapter, as the memory card may be corrupted if
the battery becomes exhausted during deletion. If
the memory card becomes corrupted, initialize it.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT:
Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognize Tape
and Memory Card IDs to perform NAVIGATION
function properly.
Check if an appropriate tape and memory card are
loaded when the following messages appear: NO
ID ON TAPE OR CARD, UNABLE TO USE
NAVIGATION, THIS MEMORY CARD IS NOT
COMPATIBLE.
If you change the memory card while shooting on
one tape, two memory cards will share the tapes
thumbnail images. We recommend that you use
one memory card for one tape.
NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
ID
O V E
ST ERE O
SOODb t M 12 i E DNU 1
±0 N HRO SY C
0
.
E C MOD RE
OFCO Y P F
NRETUR
DU
DMSO N EO
OFPU
A
IN S/ V T F
RC
A
KS BL N H
L.V.DENA I
IG NANAV T I O
ETEDE L CURRENT ?
EXECUTE
RETURN
3 CED:20600P3M
ADVANCED FEATURES
GR-D200US.book Page 49 Friday, April 11, 2003 1:05 PM
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D201 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D201

JVC GR-D201 User Manual - German - 88 pages

JVC GR-D201 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info