663421
43
Zoom out
Zoom in
Previous page
1/88
Next page
EN
ENEN
EN

"!
"!"!
"!
Master Page: Right
If Program AE with special effects ( pg. 33) is
engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.
If SNAPSHOT is pressed when DIS is set to
ON ( pg. 36), the Stabilizer will be disabled.
During playback as well, all snapshot modes are
available when COPY is set to OFF
in VIDEO Menu. ( pg. 40) However, the shutter
sound is not heard.
During Snapshot recording, the image displayed in
the viewfinder may be partially missing. However,
there is no effect in the recorded image.
When a cable is connected to the S/AV connector,
the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
Motor Drive Mode
Keeping SNAPSHOT pressed in step 5 provides an
effect similar to serial photography. (Interval
between still images: approx. 1 second)
The Motor Drive mode is disabled when REC
SELECT is set to / . ( pg. 39)
The flash can be used when a snapshot is taken in
Record-Standby mode. ( pg. 23, 42)
When the Power Switch is set to A, the flash
automatically fires if it is dark ( appears).
When the Power Switch is set to M, you can
select the flash setting. ( pg. 31, 37)
If AUTO C is selected...
The C Red-Eye reduction indicator lights. Press
SNAPSHOT. The flash fires twice. The first flash is
for reduction of the human eyes red reflection and
the second flash is for the actual recording.
NOTES:
Do not fire the flash at a person at short range.
The flash does not fire when the flash is set to
OFF or when Night-Alive mode ( pg. 42) is
engaged, and also when the battery remaining
power is low.
The flash does not fire even when it is set to ON,
if Program AE with special effects is set to
SPORTS or SNOW.
Although images shot with a flash tend to look
whiter than they actually are, to compensate for
this the camcorder automatically darkens the
picture when using the flash. When shooting a
subject at a distance where the flash light cannot
reach (over approx. 2 m (6.5 ft)), set the flash to
OFF to prevent the picture from becoming too
dark or becoming too tinted.
The color tone changes depending on the
background lighting conditions, such as under
fluorescent or halogen lamps.
While charging the flash, blinks and the flash
will not fire. Although noise may appear, this is
not a malfunction and is not recorded. It can take
up to 10 seconds to charge the flash.
When a snapshot ( pg. 23, 42) is taken in the dark
the camcorder fires the flash and adjusts the
brightness automatically. You can also adjust the
flash brightness manually. When you find that the
snapshots you took look too bright or too dark,
adjust it manually.
1
Select FLASH ADJ. in MANUAL Menu, and
press SELECT/SET.
The parameter appears.
2
To intensify the flash, press +. To weaken the
flash, press .
Adjustment range: 3 to +3.
3
Press SELECT/SET. Press + or to select
BRETURN, and press SELECT/SET twice to
close the Menu Screen.
NOTE:
When you change the subject you are shooting or
the shooting location, set it back to ±0 as described
in step 2 and take a snapshot to check the flash
brightness. After doing this adjust to your desired
brightness.
Snapshot Flash
FLASH
Flash Brightness Adjustment
ADVANCED FEATURES
GR-D200US.book Page 43 Friday, April 11, 2003 1:05 PM
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D201 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D201

JVC GR-D201 User Manual - German - 88 pages

JVC GR-D201 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info