23033
54
Zoom out
Zoom in
Previous page
1/88
Next page
#"
#"#"
#"

EN
ENEN
EN
Master Page: Left
It is also possible to copy recorded scenes from
another video unit equipped with a DV connector
onto the camcorder. Since a digital signal is sent,
there is little if any image or sound deterioration.
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit equipped
with a DV output connector using a DV cable as
shown in the illustration.
3
Set this camcorders VIDEO/MEMORY Switch to
VIDEO.
4
Set this camcorders Power Switch to PLAY
while pressing down the Lock Button located on
the switch.
5
Set REC MODE to SP or LP. ( pg. 31, 34)
6
Turn on the video units power.
7
Insert the source cassette in the video unit.
8
Insert the recording cassette in this camcorder.
9
Press the Recording Start/Stop Button to engage
the Record-Pause mode.
The “” indication appears on the screen.
10
Press the Recording Start/Stop Button to start
recording.
The indication rotates.
11
Press the Recording Start/Stop Button again to
engage the Record-Pause mode.
The indication stops rotating.
12
Repeat steps 10 11 for additional editing.
Stop the video unit and camcorder.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(
pg. 11)
If no image is displayed on the LCD monitor, set
S/AV INPUT to OFF. ( pg. 31, 40)
If the remote control is used when both the player
and recorder are JVC video units, both units will
perform the same operation. To prevent this from
happening, press the buttons on both units.
If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
Even though the DV cable is connected correctly,
sometimes the image may not appear in step 9. If
this occurs, turn off the power and make
connections again.
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current SOUND MODE setting. ( pg. 34)
When using a DV cable, be sure to use the
optional JVC VC-VDV204U DV cable.
Dubbing From A Video Unit
Equipped With A DV OUT
Connector (Digital Dubbing)
Core filter
To DV
DV cable
(optional)
Video unit equipped with DV
connector
To DV OUT
DV. IN
DUBBING (cont.)
GR-D200US.book Page 54 Friday, April 11, 2003 1:05 PM
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-D200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-D200 in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-D200

JVC GR-D200 User Manual - German - 88 pages

JVC GR-D200 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info