595786
51
Zoom out
Zoom in
Previous page
1/60
Next page
51
112min
EPREC
1min
TAPE END
Congratulations
PAUSE
1/4s
T40
INDEX
MWB
DEC 25. 96
l
PM 4:28:34
+
02
W
T
12 3 4 567
8
9
0
!
@
#
$%&^
*
(
)
q
w
e
r
INDEX
Viewfinder
# Clock Warning
Once the power is turned on and the indicator
blinks for about 10 seconds, perform the date
and time settings (
Z pg. 11). After setting is
complete, turn the power off and disconnect the
power source. If you re-connect it and turn the
power on and the indicator is blinking, that
means that the clock (lithium) battery is either
not installed or has discharged. Install, or replace
the old battery with, a new one (
Z pg. 10).
$ Time Display ....................................... Z pg. 20
% Instant Title Display ............................. Z pg. 32
^ Tape End Display ................................ Z pg. 16
Appears when the end of the tape is reached
during playback, recording or fast-forward.
& Date Display ....................................... Z pg. 20
* Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
( Main Menu Setting Change
Indicator ............................................. Z pg. 31
) FADE/WIPE indicator .......................... Z pg. 28
q D.I.S. (Digital Image Stabilizer)
Indicator ............................................. Z pg. 22
w EFFECT/PROG.AE indicator ................. Z pg. 26
e Recording Indicator ............................. Z pg. 16
r Zoom Indicator Bar ............................. Z pg. 17
Viewfinder Indications
1 Remaining Tape Time .......................... Z pg. 16
2 Recording Mode (SP/EP) Indicator ....... Z pg. 13
3 Interval Timer Indicator. ......................Z pg. 34
4 Recording Time Indicator .................... Z pg. 35
5 Tape Length Display ............................ Z pg. 12
6 Battery Pack Remaining Power
Indicator ............................................... Z pg. 8
Changes as follows according to the battery
pack’s remaining power level:
”. When the power is
almost gone, the indicator blinks, then the unit
shuts off. Replace the battery pack with a fully
charged one.
(Note: The symbol containing 3 darkened
squares — — does not necessarily mean
that the battery pack is fully charged.)
7 Cassette Indicator
Blinks when no cassette inserted;
remains steadily lit when cassette inserted.
8 Focus Indicator ................................... Z pg. 24
9 Exposure Level Display ....................... Z pg. 22
0 White Balance Mode Indicator ............ Z pg. 23
! Record–Standby Mode Indicator ......... Z pg. 16
@ Index Code Marking ............................ Z pg. 18
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-AX810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-AX810 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info