595775
45
Zoom out
Zoom in
Previous page
1/56
Next page
EN45
Warning Indications
Indications Function
Displays the battery remaining power.
Remaining power level: high. It does not necessarily mean that the battery
pack is fully charged.
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks
(battery power warning).
When the battery power is exhausted, power turns off automatically.
Blinks when no cassette is loaded, or when the Erase Protection tab is not in
the position that allows recording. (Z pg. 10)
Blinks for approx. 10 seconds when the power is turned on. This display also
blinks when the clock (lithium) battery is either not installed or has discharged.
Install or replace the old battery with a new one. (Z pg. 10)
Appears when the tape ends during recording, playback or fast-forward.
(Z pg. 17)
Blinks for approx. 5 seconds when the camcorder is turned on with the lens
cover closed. (Z pg. 16)
These 2 warnings appear alternately every 3 seconds if condensation occurs. In this
case, all functions except tape eject and power on/off are disabled. Turn the unit off
(without removing the power supply), wait a few minutes for the warnings to clear,
and turn it on again.
These 2 warnings appear alternately every 3 seconds if dirt is detected on the
heads during recording. In this case, use an optional cleaning cassette. If the
warning remains after cleaning, consult your nearest JVC dealer.
The error indications (E01 — E06) show what type of malfunction has occured.
If an error indication and warning appear, turn the unit off, remove the power
supply (battery, etc.) and wait a few minutes for them to clear. When it does,
you can resume using the camcorder. If the indication remains, consult your
nearest JVC dealer.
Indications During Playback
TAPE END
E01 — E06
SAFEGUARD FUNCTION
HAS BEEN ACTIVATED
REATTACH BATTERY
CONDENSATION
PLEASE WAIT
LENS COVER
TAPE HEAD IS DIRTY
USE CLEANING
CASSETTE
T
V
B
O
C
LUM
M
E
0
:
S
1
2
E
:
T
3
4
1
6
S
:
P
2
3
:
4
4
A
5
T
+
2 7 4 1 3 5 6
9 8
1 : Cassette Indicator
Displayed when a tape is loaded.
w: Insert Editing Indicator .................. Z pg. 38
Displayed during Insert Editing.
2 TBC Indicator ...................................... Z pg. 32
3 Recording Format Indicator (S/S-ET)
(GR-SXM320/SX851 only) .................... Z pg. 13
4 Tape Counter ................................. Z pg. 32, 38
5 Recording Mode Indicator (SP/EP) ........ Z pg. 12
6 Tape Running Indicator
4
: Playback
3
: Fast-Forward/Shuttle Search
2
: Rewind/Shuttle Search
6 : Pause
e
4
: Audio Dubbing
7 Tracking Indicator ................................ Z pg. 32
8 Tape Counter ....................................... Z pg. 38
Displayed only during Insert Editing.
9 BRIGHT: Bright Level Indicator
(GR-SXM320 only) ............................ Z pg. 31
VOLUME: Speaker Volume
Indicator (GR-SXM320 only) .............. Z pg. 31
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-AX750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-AX750 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info