595771
39
Zoom out
Zoom in
Previous page
1/56
Next page
39
1MIN
INDEX
1/2S
15°
5m(16.4ft)
15°
30°
30°
FEATURE: Self-Timer, Animation and Time-Lapse
PURPOSE: The remote control lets you set/release
Interval Timer and Rec Time functions
as well as the Menu screen.
OPERATION:
Self-Timer
1) Set
Instead of performing steps 1 through 3
on pg. 28 (“Self-Timer”), press INT.
TIME on the remote control. Each time
INT. TIME is pressed, the Interval Timer
indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN
and No indication (off).
2) Release
Instead of setting “INTERVAL TIMER” to
“OFF” in the Menu, press INT. TIME on
the remote control until the Interval
Timer indicator disappears.
Animation
1) Set
Instead of performing steps 1 and 2 on
pg. 29 (“Animation”), press REC TIME
on the remote control. Each time REC
TIME is pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).
2) Release
Instead of using the Menu in step 5 on
pg. 29, press REC TIME on the remote
control until the Rec Time indicator
disappears.
Time-Lapse
1) Set
Instead of performing steps 1 through 3
on pg. 29 (“Time-Lapse”), press INT.
TIME and REC TIME on the remote
control. Each time INT. TIME is
pressed, the Interval Timer indicator
appears, changing in the following
order: 15S, 30S, 1MIN, 5MIN and No
indication (off). Each time REC TIME is
pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).
2) Release
Instead of using the Menu in step 5 on
pg. 29, press INT. TIME and REC TIME
on the remote control until the
indicators disappear.
NOTE:
Also refer to pgs. 28 and 29.
FEATURE: Index Code Marking (RM-V700U only)
PURPOSE: To give you automatic access to any
selected point on a recording.
OPERATION: 1) Press VISS once to place the index
code. “INDEX” blinks in the viewfinder
during marking.
NOTE:
If VISS is pressed during Record–
Standby mode, the mark is placed
where RECORDING START/STOP is
pressed.
When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
RM-V700U
(optional)
Transmitted beam
effective area
INT. TIME
REC TIME
START/STOP
VISS
OR
RM-V705U (provided
with GR-AX720 only)
Rec Time Indicator
Interval
Timer Indicator
Viewfinder
Remote sensor
(GR-AX720 only)
Index Code Marking
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-AX420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-AX420 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info