40062
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
ENGLISH
Serial Connections and Operations
When the Monitors are serially connected, you can control all of them at the same time (simultaneous operation) or control them
one by one separately (individual operation).
For individual operation, you have to assign an ID number to each of the Monitors.
For the purpose of explanation, we will call Monitor 1 as a Master and Monitor 2 and subsequent Monitors as Slaves.
Connecting the Remote Control Cables
Remote control
Assigning ID Numbers
The following procedure should be performed slowly and
securely.
1
Turn on all the connected Monitors.
2
Press MODE.
On Master Monitor screen, “MASTER” is displayed, and
“[00]” is displayed on all of Slave Monitor screens.
3
Press ID SET.
On the Slave Monitor screens, “[01]”, “[02]”, “[03]”, ——
and so on will be displayed in the order of connection.
Notes:
When a maximum number of 20 Monitors are connected, it
will take approx. 10 seconds for ID numbers to be displayed
on all the screens.
If “[00]” is displayed on all the Monitor screens or if some
of the Monitors have no indication in step 1, press MODE to
turn off the indications on all Monitor screens, and then
press MODE again.
MASTER
[01] [02] [XX]
MASTER
[00] [00] [00]
Slave 2
Master
Slave 1
Slave XX
Slave 2
Master
Slave 1
Slave XX
Remote control cable
(supplied with
Monitor 2)
Remote control cable
(supplied with
Monitor 1)
Remote control cable
(supplied with
Monitor 3)
Notes:
Do not connect the last monitor to Monitor 1.
When operating with a wired remote control, connect it to the REMOTE 2 (JVC CODE) input terminal of Monitor 1.
When Monitors are serially connected, Monitor 2 and subsequent Monitors cannot be directly controlled with a wireless
remote control.
Even after the Monitors are serially connected, each of them can be operated using the buttons on the Monitor. However,
you cannot perform simultaneous or individual operation even with the buttons on Master Monitor.
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Remote control
cable (supplied)
Monitor 1
(Master)
Monitor 2
(Slave)
Monitor 3
(Slave)
Monitor XX
(Slave)
When performing simultaneous or individual operation,
use the remote control.
MENU/EXIT
MODE
ID SET
ID +/–
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GD-V4210PZW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GD-V4210PZW in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info