40062
11
Zoom out
Zoom in
Previous page
1/40
Next page
11
ENGLISH
Precautions
Before making connections, turn off all the equipment.
Plugs should be firmly inserted; poor connection could cause noise.
To unplug a cord, be sure to grasp its plug and pull it out.
Connect the power cord after having finished all other connections.
Refer also to the user manual of each piece of equipment.
Available Signals
Video signals
The following signals can be input to this Monitor:
VIDEO A and VIDEO B terminals accept — PAL, NTSC, NTSC4.43, and SECAM signals.
COMPONENT terminals accept — 480i, 576i, 480p, 720p, and 1080i (1035i) signals.
(For GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE, to input the above signals, you need to install the video interface kit
(IF-C421P1W), which is separately purchased.)
Computer signals (Preset and user-defined video modes)
This Monitor has 13 preset video modes for the most popular industrial standard (marked with in the table below), and the
signals of the following image resolutions can be input to the RGB input terminals.
For less common video modes, this Monitor can also display a picture, and memorize the video modes as user-defined video
modes (up to five modes).
When a signal other than any of the preset modes is input, it will automatically be stored as a user-defined video mode, and
when a sixth user-defined video signal is input, the first mode will be erased from memory.
1 PC98 640 400 24.8 56.4 Non-interlace
2 VGA400-70 640 400 31.5 70.1 Non-interlace
3 VGA480-60 640 480 31.5 59.9 Non-interlace
4 VGA480-72 640 480 37.9 72.8 Non-interlace
5 VGA480-75 640 480 37.5 75.0 Non-interlace
6 MAC13” 640 480 35.0 66.7 Non-interlace
7 SVGA-56 800 600 35.2 56.3 Non-interlace
8 SVGA-60 800 600 37.9 60.3 Non-interlace
9 SVGA-72 800 600 48.1 72.2 Non-interlace
10 XGA-60 1024 768 48.4 60.0 Non-interlace
11 XGA-70 1024 768 56.5 70.1 Non-interlace
12 RGB15K-60 15.7 59.9 Interlace
13 RGB15K-50 15.6 50.0 Interlace
User-defined 15.0 – 16.0 50.0 – 75.0 Interlace
User-defined 16.0 – 56.0 50.0 – 75.0 Non-interlace
Notes:
When you are viewing XGA, setting the refresh rate (vertical scan frequency) of your personal computer to 60 Hz will enhance
the video image.
When a signal other than listed above is input, a part of the screen may become void or an unnecessary picture may appear.
Signals, though they are within the acceptable range of frequencies, may not be displayed normally, depending on the signal
type.
Depending on the connected equipment, the Monitor may not be compatible with composite sync (Cs) or G on sync signals.
When a preset mode signal is input, the vertical frequency displayed on the screen will have an “*” shown at its right top
position.
When No. 7 to No. 11 signals are input, thin lines may happen to be hard to view on the screen, due to the internal digital
processing.
Connections
Screen resolution
Horizontal
Vertical
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Preset
setting
Signal name Scan systemNo.
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GD-V4210PZW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GD-V4210PZW in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info