29827
18
Zoom out
Zoom in
Previous page
1/28
Next page
15
Using the Tuner
To temporarily switch to a broadcast
programme of your choice
EON (Enhanced Other Networks) is another convenient
RDS service that allows this unit to switch temporarily to a
broadcast programme of your choice (NEWS, TA or INFO)
from the currently selected station, except if you are listen-
ing to a non-RDS station (all AM (MW/LW) stations or
some FM stations).
If an FM station does not broadcast EON information,
EON cannot be activated.
To select a programme type
1
Press the PTY/EON button twice while
listening to an FM station.
“EON SELECT” apears on the display.
2
Select the programme type with the UP
or DOWN button on the Remote Control
or the
4
44
4
or
¢
¢¢
¢
button.
The display shows a programme type in the following
order:
TA:
Traffic Announcement
NEWS:
News
INFO:
Programmes on medical service, weather
forecast, etc.
OFF:
EON off
3
Press the PTY/EON button within 10
seconds again to set the selected pro-
gramme type.
The selected programme type indicator lights up on the
display, and the unit enters EON Standby mode.
The EON indicator lights up when tuned to a station
which provides EON information.
Case 1:If there is no station broadcasting the type
of programme you have selected
The broadcast station being currently heard will continue to
be heard.
«
When a station starts broadcasting the programme you have
selected, this unit automatically switches to the station. The
programme type (TA, NEWS or INFO) indicator starts
blinking.
«
When the programme is over, this unit goes back to the cur-
rently selected station, but still remains in EON Standby
mode.
Case 2:If there is a station broadcasting the type
of programme you have selected
This unit tunes to the station broadcasting the programme.
The programme type (TA, NEWS or INFO) indicator starts
blinking.
«
When the programme is over, this unit goes back to the cur-
rently selected station, but still remains in EON Standby
mode.
If the EON is in standby mode and the function (CD, MD/
AUX) switch is changed or the power is switched off, then
the EON mode will be released. When the band is set to
AM (MW/LW), the EON is not activated. When the band is
set to FM again, the EON will be set to standby mode.
When the EON is being operated (i.e. the selected pro-
gramme type is being received from the broadcast sta-
tion) and if the DISPLAY MODE or
4
,
¢
button is
operated, the station will not switch back to the current se-
lected station even after the programme ends. The pro-
gramme type indicator remains in the display, indicating
that the EON is in standby mode.
When the alarm signal is detected by EON, the station
broadcasting the alarm is received with priority. “Alarm !”
is not displayed.
CAUTION:
• When the sound alternated intermittently
between the station tuned in by the EON
function and the current selected station,
cancel the EON mode. This does not consti-
tute malfunction of the unit.
PTY/EONPTY/EON
UP
DOWN
FS-SD5(B).book Page 15 Tuesday, February 15, 2000 1:13 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC FSSD5R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC FSSD5R in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info