158881
50
Zoom out
Zoom in
Previous page
1/65
Next page
14
Using the Tuner
English
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM sta-
tions.
Preset numbers may have been set to factory test fre-
quencies prior to shipment. This is not a malfunction. You
can preset the stations you want into memory by following
one of the presetting methods below.
On the Remote Control
1
Select a band by pressing the FM/AM
button.
2
Press the
5
or
button to tune in a sta-
tion.
3
Press the SET button.
Preset number 1 will blink for 5 seconds.
Within 5 seconds, proceed to the next step.
When the display returns to the one set in step 2 after 5
seconds, press the SET button again.
4
Press the Numeric Keys, or the
3
or
2
button within 5 seconds to select the
preset number.
5
Press the SET button within 5 seconds.
STORED appears and after 2 seconds, the display re-
turns to the broadcast frequency display.
6
Repeat above steps 1 to 5 for each sta-
tion you want to store in memory with a
preset number.
To change the preset stations, repeat the same
steps as above.
CAUTION:
Even if the system is unplugged or if the
power failure occurs, the preset stations
will be stored for about 24 hours. However,
in case the preset stations are erased, you
will need to preset the stations again.
To Change the FM Reception
Mode
When you are tuned into an FM stereo broadcast, the ST.
indicator lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you
lose stereo effect.
FM AUTO mode is also useful to suppress static noise be-
tween stations.
To enter Monaural mode while receiving an FM
broadcast, press the FM/PLAY MODE button on the Re-
mote Control until FM MONO appears on the display. Then,
the MONO indicator lights up.
Each time you press the FM/PLAY MODE button, the display
alternates between FM AUTO and FM MONO.
To restore the stereo effect, press the FM/PLAY
MODE button on the Remote Control until FM AUTO ap-
pears on the display. Then, the MONO indicator goes out
and the ST. indicator will light up.
Beat Cut (AM Reception)
Switching the Beat Cut mode may reduce beat noise.
Each time you press the FM/PLAY MODE button while re-
ceiving an AM broadcast, the Beat Cut mode changes as fol-
lows.
BEAT CUT 1
=
BEAT CUT 2
=
BEAT CUT 3
=
BEAT CUT 4
=
(back to the beginning)
Set to the position where beat noise is small.
The best position will differ depending on the AM
broadcast station being received.
In AM broadcast, reception sensitivity will be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
SET
+10
1 STORED
2
SET
FM
/
AM
When changing the Band
FM = 30, AM = 15
or
FM/PLAY
MODE
FM AUTO Ô FM MONO
FM/PLAY
MODE
Example:
FS-X1-3(C)_E.book Page 14 Thursday, March 27, 2003 1:43 PM
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC fs x3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC fs x3 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info