655242
31
Zoom out
Zoom in
Previous page
1/101
Next page
EN 31
ADVANCED OPERATIONS
MasterPage: Menu_Heading0_Right
RECORDING FEATURES
Backlight compensation brightens the subject
quickly. With simple operation, dark portions of
the subject are brightened by increasing the
exposure.
1 Set the power switch to .
2 Press and hold ( / ) so that is
displayed.
3 Press ( ) once so that the indicator
appears.
To cancel backlight compensation
Press ( ) twice so that the indicator
disappears.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas.
1 Set the power switch to .
2 Press and hold ( / ) so that is
displayed.
3 Press ( ) twice so that the indicator
appears.
The spot metering area frame appears at the
centre.
4 Press / to select the desired spot
metering area frame.
5 Press 49. The setting is completed.
To lock the exposure
After step 4, press and hold 49 for over 2
seconds. The indicator appears.
To cancel spot exposure control
Press ( ) once so that the indicator
disappears.
NOTES:
Spot exposure control may not be possible when
some other functions are activated.
Depending on the shooting location and condition,
optimum result may not be attained.
You can use the flash for still image recording.
The flash mode can be changed as required.
1 Set the power switch to .
2 Set the MODE switch to .
3 Press FLASH repeatedly to select the
desired flash mode.
The selected mode indicator will be displayed on
the screen.
[AUTO]: The flash fires automatically when
the surroundings are dark.
AUTO RED-EYE: The flash fires
automatically but reduces the red-eye
phenomenon of the subject's eyes.
ON: The flash fires regardless of the shooting
condition.
SLOW SYNCHRO: The flash fires
regardless of the shooting condition. The shutter
speed becomes slower in this mode, so the
background can also be brightened.
[ ] = Factory-preset
When not using the flash
Press FLASH repeatedly until no flash mode
indicator is displayed on the screen.
NOTES:
The flash and the continuous shooting cannot be
used at the same time. The unusable mode
indicator blinks or goes out.
The flash mode indicator also blinks while
charging the flash.
If the flash mode is selected before turning the
LCD monitor, you can continue to use the flash
after the LCD monitor is turned 180°, even though
the flash mode indicator will disappear. The flash
mode cannot be selected after the LCD monitor is
turned 180°. ( pg. 9)
If the flash is not bright enough, set [GAIN] to
[AUTO] or [160]. ( pg. 51) Alternatively, set
[S.SP] to [NIGHTSCOPE] in the MSET menu.
( pg. 35)
Backlight Compensation
/
Spot Exposure Control
/
Flash
FLASH
M5E6PAL.book Page 31 Friday, August 26, 2005 8:16 PM
Downloaded From VideoCamera-Manual.com Manuals
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC Everio GZ-MG60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC Everio GZ-MG60 in the language / languages: English as an attachment in your email.

The manual is 20,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info