660750

JVC DT-V21G2 Manual

22
Zoom out
Zoom in
Previous page
1/36
Next page
2222
<Specifications of the RS-485 terminal>
Pin No. IN terminal signal
OUT terminal
signal
1 TXD + TXD +
2 TXD – TXD –
3 RXD + RXD +
4 NC NC
This is a female
terminal.
5 NC NC
6 RXD – RXD –
7 NC NC
8 GND GND
<Specifications of the RS-232C terminal>
Pin No. Signal
1 NC
2 RXD
3 TXD
4 NC
5 GND
This is a female
terminal.
6 NC
7 RTS
8 CTS
9 NC
l
The 7th terminal and the 8th terminal are connected.
<Command outline>
All commands consist of the following segments.
Header Monitor ID Function Data Cr (0Dh)
On Header
“!” : Operation commands from the personal computer, etc. (+ <Basic command list> below table).
“?” : Reference commands from the personal computer, etc.
“@” : Status returns from the monitor
To start communication, send the connection command from the personal computer etc.
To terminate the communication, send the termination command from the personal computer etc.
Example of communication procedures
1 Starting the communication:
connection command (!00BCN1Cr)
3 Selecting “SDI 1” input (!00BINACr)
5 Terminating the communication:
termination command (!00BCN0Cr)
6 Monitor’s status (@00BOKCr)
4 Monitor’s status (@00BOKCr)
2 Monitor’s status (@00BOKCr)
PC, etc.
Monitor
<Basic command list>
No. Commands Functions Data
1 ! * **
1
B C N O Cr Terminates communication (termination) No data
2 ! * **
1
B C N 1 Cr Starts communication (connection) No data
3 ! * **
1
B I D S E T x x*
2
Cr Assigns the control ID 00-99
4 ! * **
1
B I D R E T Cr Initializes the control ID No data
5 ! * **
1
B I D D S P x x*
2
Cr Displays/hides the control ID 00: Hide, 01: Display
6 ! * **
1
B M E N U Cr Displays the Main Menu/Quits the menu operation No data
7 ! * **
1
B U P Cr
Moves the cursor upward (
)
No data
8 ! * **
1
B D O W N Cr
Moves the cursor downward (
)
No data
9 ! * **
1
B A D J R Cr Makes setting/adjustment ( ) No data
10 ! * **
1
B A D J L Cr Makes setting/adjustment ( ) No data
11 ! * **
1
B S E T U P Cr Displays the Set-Up Menu No data
12 ! * **
1
B P W O Cr Turns off monitor power control No data
13 ! * **
1
B P W 1 Cr Turns on monitor power control No data
14 ! * **
1
B I N A Cr Selects “A SDI1” input No data
15 ! * **
1
B I N B Cr Selects “A SDI2” input No data
16 ! * **
1
B I N C Cr Selects “C HDMI” input No data
17 ! * **
1
B I N D Cr Selects “D COMPO.” input No data
18 !
* **
1
B I N E Cr Selects “E VIDEO” input No data
19 !
* **
1
B D I S P Cr Displays signal status*
3
No data
20 !
* **
1
B A M U T E x x*
2
Cr Turns muting on/off 00: Off, 01: On
21 !
* **
1
B A S P x x*
2
Cr Switches ASPECT (direct) 00: 4:3, 01: 16:9
l
“Cr” is 0Dh.
l The commands for starting communication (connection) (No. 1), terminating communication (termination) (No. 2), and turning on the
monitor (No. 9) can be used while the monitor is off (on standby) when “Standby Mode” is set to “Serial” or “SDI Out”.
*
1
Enter the monitor’s ID for “ **.” The initial setting of the monitor’s ID is “00.” When connecting several monitors, “00” is a command for controlling all
monitors at once.
*
2
Enter the appropriate data to “xx.”
*
3
Displays the information shown when the INPUT SELECT button currently lit is pressed. (+ “On the Status Display” on page 8)
External Control (cont.)
DT-V24G2_EN.indb 22 2016/07/27 16:37:17
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V21G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V21G2 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V21G2

JVC DT-V21G2 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info