660750
17
Zoom out
Zoom in
Previous page
1/36
Next page
1717
White Balance Setting
Display the color temperature, and adjusts the drive level and cutoff point of each color (R/G/B).
Item To do Setting value
Color Temperature Select the color temperature. (Cannot be set/changed) 9300K, 6500K, 5600K, User
R Drive *
1
G Drive
B Drive
Adjust the drive level of each color (red, green, and blue).
The maximum (Max) and minimum (Min) values vary depending on the input signal or
other settings.
Min – 000 – Max
(in 1024 grades)
R Cut Off *
1
G Cut Off
B Cut Off
Adjust the cutoff point of each color (red, green, and blue).
The maximum (Max) and minimum (Min) values vary depending on the input signal or
other settings.
Min – 000 – Max
(in 1024 grades)
sub menu Display the sub menu which enables you to adjust the items in “White Balance Setting” while viewing the actual picture.
reset Restore the default settings for all the items in “White Balance Setting”.
*
1
Memorized for each “Color Temperature”.
Remote Setting
Settings for the external control.
Item To do Setting value
Serial Type Select a terminal for external control in serial mode. RS232C, RS485
Parallel Type Select a control method of the MAKE/TRIGGER terminal. Make, Trigger, Set
Pin1
Assign the control functions to the pins of the MAKE/TRIGGER terminal.
Assign a function to each pin terminal by selecting “Set” in “Parallel Type” mentioned
above.
+ “Display” in “Functions
controlled by the MAKE/
TRIGGER system” on page
21
Pin2
Pin3
Pin4
Pin5
Pin6 The functions are assigned for “Pin6” – “Pin8” and you cannot change the assignment of
these functions.
Tally
Pin7 Enable
Pin8 GND
Information
Settings for the information display of the monitor.
Item To do Setting value
Source ID
Select whether the name assigned in “Character Setting” (+ below) is displayed on the
screen (+ “On the Information Display” on page 8).
When “Auto” is selected, the display color synchronizes with the color of the tally lamp
while the tally lamp is lit.
Off, On, Auto
Character Setting Assign a name to each video source as you like (10 characters at maximum). You can also enter a name using the RS-232C
system. (+ Page 19)
Status Display
Display/Hide the status of the current input and the setting of MUTING. (+ “On the Status
Display” on page 8)
Auto, Off, On
Time Code Select the type of the TIME CODE display.
VITC*
1
, LTC*
1
, D-VITC
CRC Error
Display/Hide the CRC error when the HD SDI signal is input. (+ “On the Information Display”
on page 8)
Off, On
Sub Hour Meter Display the hours of use (unit: hour). The usage time can be reset to 0.
Model Display the model name of the monitor.
Version Display the version of the monitor.
Hour Meter Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You cannot reset this item.
*
1
Ancillary time code
Control Lock Setting values: Off, Volume Lock, All Lock
Settings for disabling the buttons on the front panel.
The following operations are not available when “Volume Lock” is selected.
- Picture adjustment knob
- VOLUME adjustment knob
The “All Lock” function disables to control the buttons on the front panel. But following operations are available.
- Turning on/off (on standby) the monitor
- Displaying the Set-Up Menu by pressing
button while holding button and turning “Control Lock” to “Off”
- Operating the monitor by an external control
If you try other operations, “Control Lock On!” appears on the screen.
Language Setting values: English, Deutsch, Français, Español, Italiano, Pуccкий
Select the displayed language for the menu, etc.
DT-V24G2_EN.indb 17 2016/07/27 16:37:15
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V21G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V21G2 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V21G2

JVC DT-V21G2 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info