660750
8
Zoom out
Zoom in
Previous page
1/36
Next page
88
Audio Channel Selection
Select the audio channel output from the Speaker and AUDIO ASSIGN (MONITOR OUT) (OUT1(L)/OUT2(R))
terminals when an EMBEDDED AUDIO signal is input during SDI input.
l Store the setting for each input of SDI 1 and SDI 2.
1 When the menu is not displayed, use the button
The “Embedded Audio” screen appears.
l The “Embedded Audio” screen disappears automatically is no operations are made for about 30 seconds.
2 Use the
buttons to select the audio channel
3 Use the
buttons to select the left and right channels (L ch/R ch/L ch+R ch)
l Each time you press a button the audio channel changes together with “Embedded Audio ch Setting”.
(+ page 13)
4 Press the MENU button
l The “Embedded Audio” screen disappears.
On the Information Display
The monitor displays the information below.
l Make the setting to display/hide each information using the MENU with the exception of 5, controlled with T.C. button (+ t on page 7).
1 Level meter
l You can check the conditions of the EMBEDDED AUDIO signals when “Level Meter Display”
is set to “Horizontal1” or “Horizontal2” or “Vertical.” (+ “Audio Setting” on page 13)
l Not displayed when “Audio Meter Display” is set to “Off” or “Lissajous”.
2 Signal format
l Displayed when “Status Display” is set to “On.” (+ “Information” on page 17)
l For the contents displayed, see “Available signals” on page 27 and “On the signal format” below.
3 Source name assigned in “Character Setting”(+ “Information” on page 17)
l Displayed when “Source ID” is set to “On” or “Auto.” (+ “Information” on page 17)
l Displayed in large letters when “Status Display” is set to “Off” or “Auto.”
4 CRC error indication
l Displayed when “CRC Error” is set to “On.” (+ “Information” on page 17)
l A red square is displayed when an error occurs.
5 Time code
l Press T.C. button (+ t on page 7).
l When the input signal includes no time code, “TC – –:– –:– –:– –” is displayed (+ “Information” on page 17).
On the Status Display
If you press the INPUT SELECT button (+ u on page 7) currently lit, the status of the input signal and setting of MUTING are displayed for
about 3 seconds.
l Make the setting to display/hide the status in “Status Display” of the “Information”. (+ page 17)
l When “Status Display” is set to “Auto” or “On,” the status below is also displayed in the following cases:
– When you change the input
– When the signal condition of the current input changes
– When you turn on the monitor
l When “Status Display” is set to “On,” the signal format and “Picture Memory Mode” will remain
displayed 3 seconds after the status is displayed. If “Picture Memory Mode” is set to “Off”, it will not be displayed.
1 Signal format
l For the contents displayed, see “Available signals” on page 27 and “On the signal format” below.
On the signal format
The following messages appear depending on the type of input signals and their conditions.
When a HDMI signal protected with HDCP is input
When no video signal comes in
When a noncompliant video signal comes in
Ô
Ô
Ô
“*” (at the end of the indication)
“No Sync”
“Out of range”
2 Signal format of HDMI and VIDEO/COMPONENT input
Status indication of DUAL LINK/3G SDI signal information
l “DUAL LINK” appears when the Main Menu “Dual Link” (+ page 12) is set to “On” in SDI input, and the 3G SDI signal information appears
when the Main Menu “Dual Link” is set to “Off.”
Status indication of 3G SDI signal information
Following signal information can be displayed when a 3G SDI signal comes in.
3G A-1: Level A mapping structure 1
3G A-2: Level A mapping structure 2
3G A-3: Level A mapping structure 3
3G A-4: Level A mapping structure 4
3G B-DS1: Level B data stream 1
3G B-DS2: Level B data stream 2
3G B-DUAL: Level B DUAL LINK
3 Detailed information of 3G SDI/HD-SDI DUAL LINK signal input
l Displays the sampling structure/pixel resolution of the signal format.
l Displayed when the 3G SDI/HD-SDI DUAL LINK signal is input.
4 Setting of “MUTING”
l Only appears when in mute mode (+ 4 on page 6).
5 Displaying the Picture Memory Mode
l Mode-1, Mode-2 or Mode-3 appears (+ on page 11).
< Embedded Audio 1/2 >
Output 1ch : L
Output 2ch : L
Output 3ch : L
Output 4ch : L
Output 5ch : L
Output 6ch : L
Output 7ch : L
Output 8ch : L
Embedded Audio screen
Showing Input Signals
1080 / 59.94p
3G A-2
4:4:4 RGB 10bit
Muting On
Mode-1
DT-V24G2_EN.indb 8 2016/07/27 16:37:10
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V21G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V21G2 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V21G2

JVC DT-V21G2 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info