660750
5
Zoom out
Zoom in
Previous page
1/36
Next page
55
Index of Parts and Functions
1 REMOTE terminal
Terminal for controlling the monitor by an external control
(+ “External Control” on page 20).
2 VIDEO terminals (BNC)
Input and output terminals for the composite signals.
3 COMPO. (Y, PB/B-Y, PR/R-Y) terminals (BNC)
Input terminals for the analog component (color difference) signal.
4 AUDIO ASSIGN (IN 1, IN 2) terminals (IN 1: pin jack, IN 2: Φ3.5mm)
Input terminals for the analog audio signals.
l Use this terminal for the analog audio connection of the SDI.
When a superimposed signal (EMBEDDED AUDIO signal on an
SDI signal) is input, analog audio signals cannot be input.
5 AUDIO ASSIGN (MONITOR OUT) terminals (pin jack)
Output terminals for the analog audio signal.
l The signal is output from this terminal only when the monitor is
on or in “Power Save” mode (+ “No Sync Action” on page 15).
l The EMBEDDED AUDIO signal...
is decoded into an analog signal, then emitted.
is emitted only when “SDI 1” or “SDI 2” is selected, and when
EMBEDDED AUDIO signals come in to the 3G/HD/SD SDI (IN 1
or IN 2) terminal.
l Audio signals are only output from the HDMI terminal when the
signals are not protected by HDCP.
Even when the signals are protected by HDCP, sound is emitted
from the speakers.
6 3G/HD/SD SDI (IN 1, IN 2) terminals (BNC)
Input terminals for the 3G/HD/SD SDI signals.
l The terminals accept also EMBEDDED AUDIO signals including
up to 16 audio channels with a sampling frequency of 48 kHz.
l Use SDI IN 1 and SDI IN 2 terminal when selecting DUAL LINK
SDI for the input.
Insert Link A into IN 1, and Link B into IN 2.
7 3G/HD/SD SDI (OUT 1, OUT 2: SWITCHED OUT) terminal (BNC)
Output terminal for the 3G/HD/SD SDI signals.
l For SDI OUT 1 output, the SDI IN1 signal is emitted.
l For SDI OUT 2 output, set the output signal in SDI2 OUT SEL of
the Main Menu (+ “Signal Setting” on page 12).
l
When an input other than SDI 1 and SDI 2 is selected, the SDI
signal of the input selected last time is emitted from this terminal.
l The signals are emitted from this terminal only when the
monitor is on or in “Power Save” (+ page 15) mode.
8 HDMI terminals
Input terminal for the HDMI signal compatible with HDCP.
Rear panel
9 Screw holes for external battery attachment (DT-V21G2/DT-
V17G2 only)
Attach external battery for DC power supply by using 2 screw
holes. Choose the appropriate screw holes from 1, 2 or 3 according
to the type of external battery. (Depending on the battery type.)
Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.
Caution:
Do not use the external battery for DC 24 V power supply.
Use only the battery specified above. If a heavy battery is used,
it may fall off depending on the way the monitor is used.
p DC switch (DT-V21G2/DT-V17G2 only)
Turns the DC power on or off.
l You need to press button (+ ; on page 7) on the front
panel to turn on the monitor after turning on the DC switch.
l The monitor consumes the battery even while the monitor is on
standby. To save battery life, turn off the DC switch.
q DC IN terminal (DT-V21G2/DT-V17G2 only)
DC 12 V (maximum DC 17 V) power input
connector.
When using DC 12 V power (maximum DC 17 V), check the
DC IN terminal pin signal, and use the correct polarity. If the
polarity is reversed, this could cause a fire or personal injury.
l While using both the AC and DC power supply, AC power
supply is preferentially used. If the AC power supply is cut off
(for example, when turning off the POWER switch), the power
supply automatically switches to the DC power supply.
l
Use a DC power supply with the LPS (Limited Power Sources) function.
w AC IN terminal
AC power input connector. Connect the provided AC power cord
to an AC outlet.
l Attach the provided power cord holder to prevent accidental
disconnection of the AC power cord. (+ page 24)
l Attach the provided core filter. (North America only) (+ page 24)
Caution: Do not connect the power cord until all other
connections are completed.
e POWER switch
Turns AC power on or off.
l You need to press button (+ ; on page 7) to use the
monitor after turning on the POWER switch.
Note for connections
• Beforemakinganyconnections,turnoffalltheequipment.
• Useacordwhoseplugscorrectlymatchtheterminalsonthismonitor
and the equipment.
• Plugsshouldbefirmlyinserted;poorconnectionscouldcausenoise.
• Whenunpluggingacord,besuretograspitsplugandpullitout.
• DONOTconnectthepowercorduntilallconnectionsarecomplete.
• Referalsototheusermanualofeachpieceofequipment.
Carry handle (DT-V21G2/DT-V17G2/
DT-V17G25 only)
Use this handle when carrying the monitor.
DT-V21G2/
DT-V17G2 only
Security slot
Attach a security wire to this slot.
The illustration of
the monitor is of
DT-V21G2.
DT-V24G2_EN.indb 5 2016/07/27 16:37:07
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DT-V21G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DT-V21G2 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DT-V21G2

JVC DT-V21G2 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info