20741
67
Zoom out
Zoom in
Previous page
1/112
Next page
Masterpage:Right-No-Heading
EN 67
Filename [DR-M10U_08Recording.fm]
Page 67 January 26, 2004 11:08 am
F
Enter the recording stop time.
Press we to select “STOP”, then press rt repeatedly to
set the desired stop time.
Each press of rt advances/goes back the stop time in 1-min.
increments.
To advance/go back the stop time in 30-min. increments, press
and hold rt.
G
Enter the channel position.
Press we to select “CH”, then press rt repeatedly to
select the desired channel.
H
Set “DAILY/WEEKLY” option.
Refer to step E in “VCR Plus+
®
Timer Programing”
(
pg. 60).
It is necessary to set “DAILY/WEEKLY” option for On-Disc
Timer Programing. (
pg. 61, “Daily/Weekly Rec Function”)
I
Set the other recording options as required.
Refer to step E in “VCR Plus+
®
Timer Programing”
(
pg. 60).
You can select XP, SP, LP, EP or FR480 mode for “REC
MODE”. You cannot select FR (JUST), FR60–FR360 and
FR420.
J
Access the confirmation screen.
Press ENTER.
K
Complete timer programing.
Press ENTER.
To program another timer, repeat steps B K.
To timer-record the program with the
programed disc
A
Load the disc.
A Press x to open the disc tray.
B Place the programed disc on the disc tray.
For details, refer to “Placing a Disc” ( pg. 11).
C Press x to close the disc tray.
B
Engage the unit’s timer mode.
Press DVD 1. The unit turns off and “ ” appears
on the front display panel.
To disengage the timer mode, press DVD 1 again.
NOTES:
Even if On-Disc Timer Programing is overlapping with other
timer programing, any caution message does not appear. In
such a case, recording will be executed in the descending
order of the recording start time of the program.
On-Disc Timer Programing is not possible on a DVD-RW disc
formatted in video mode. (
pg. 101, “Format a DVD-RW
disc”)
The information of a program recorded with On-Disc Timer
Programing is not stored in the library. (
pg. 82)
The play list is not created for the programs recorded with On-
Disc Timer Programing. (
pg. 78)
VCR Plus+ Timer Programing is not possible on the discs used
exclusively for On-Disc Timer Programing.
Manual Timer Programing is not possible on the On-Disc
Timer Programed disc. (
pg. 64)
Basic Recording is not possible on the On-Disc Timer
Programed disc. (
pg. 57)
The On-Disc Timer Programing function does not work on the
unit form other manufactures even if the On-Disc Timer
Programed disc is loaded.
The beginning of a program may not be recorded. Also, if the
1st program’s recording stop time and the 2nd program’s
recording start time is the same, the ending of the 1st program
may not be recorded.
If there is a power cut while recording, the recordings before
the power cut are not guaranteed.
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using the On-Disc Timer
Programing function:
A Perform “Cable Box Control Setting” (
pg. 29) or “DBS
Receiver Control Setting” (
pg. 32).
B Perform “On-Disc Timer Programing”.
C Leave the Cable Box or DBS receiver’s power on.
DR-M10U_08Recording.fm Page 67 Monday, January 26, 2004 11:08 AM
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DRM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DRM10 in the language / languages: English as an attachment in your email.

The manual is 9,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DRM10

JVC DRM10 User Manual - German - 116 pages

JVC DRM10 User Manual - Dutch - 116 pages

JVC DRM10 User Manual - French - 116 pages

JVC DRM10 User Manual - Portuguese - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info