56211
84
Zoom out
Zoom in
Previous page
1/100
Next page
Filename [MV5S_13Subsidiary.fm]
Masterpage:Left+
84 EN
SUBSIDIARY SETTINGS
Page 84Wednesday, 31 August 2005 16:55
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
Auto Channel Set
1 Press SET UP to access the Main Menu screen.
2 Press we to select “INITIAL SET UP”, then press t.
3 Press we to select “AUTO CH
SET”, then press t.
4 Press rt w e to select your
country’s name, then press
ENTER.
5 Press rt w e to select the
language of your choice.
6 Press ENTER twice.
When you have connected the unit to a TV offering T-V Link via a
fully-wired 21-pin SCART cable ( pg. 15), the unit automatically
performs the Preset Download and the T-V LINK screen will appear.
( pg. 18)
The Auto Set screen appears, and remains on screen while the unit
searches for receivable stations.
Wait until the TV screen as shown in step 7 appears.
7 View the Confirmation screen.
“SCAN COMPLETED” is displayed on the TV screen. Press “OK”.
8 Press SET UP to complete the setting.
When Auto Channel Set is completed, “PLEASE WAIT” will be
displayed for about 90 seconds, since channel data is exchanged
between the DVD deck and the VHS deck. No operations will be done
during this time.
Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations. Refer to
pages 85 – 87 for the procedures.
Depending on reception conditions, the stations may not be stored in
order, and the station names may not be stored correctly.
For information on scrambled broadcasts, refer to “When Receiving A
Scrambled Broadcast (DVD Deck Only)” ( pg. 87).
NOTES:
Fine tuning is performed automatically during Auto Channel Set. If
you want to perform tuning manually, refer to “Fine-Tuning Channels
Already Stored” (
pg. 87).
If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–” appears
on the TV screen in step 7. In such a case, make sure of the aerial
connection and press ENTER; Auto Channel Set will start again.
If no sound accompanies the picture or the audio sounds unnatural
on some channels that have been stored by Auto Set Up, the TV
system setting for those channels may be incorrect. Select the
appropriate TV system for those channels. (
pg. 87,
“INFORMATION”)
Tuner Set
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. ( pg. 17, 18)
— you have moved to a different area or if a new station starts
broadcasting in your area.
ENTER
VHS
SET UP
IMPORTANT:
In certain reception conditions, station names may not be stored
correctly, and Auto Guide Program Number Set may not work
properly. When the Guide Program numbers are not set properly,
the programme that you do not intended to record will be timer-
recorded by the SHOWVIEW system of the unit. When programming
the timer using the SHOWVIEW system, be sure to check the
desired channel is selected correctly. ( pg. 29)
Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (
pg. 86, “Delete A Channel”)
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
AUTO CH SET
MANUAL CH SET
GUIDE PR CLOCK SET
MV5S_00.book Page 84 Wednesday, August 31, 2005 4:55 PM
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-MV5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-MV5 in the language / languages: English as an attachment in your email.

The manual is 10,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-MV5

JVC DR-MV5 User Manual - German - 100 pages

JVC DR-MV5 User Manual - Dutch - 100 pages

JVC DR-MV5 User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info