56211
57
Zoom out
Zoom in
Previous page
1/100
Next page
Masterpage:Right+
EN 57
Filename [MV5S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 57Wednesday, 31 August 2005 16:55
4 Press the number buttons to enter the desired item number,
then press ENTER.
Playback starts from the selected section.
Examples:
A To select track 5, press the number button “5”.
B To select track 15, press the number button “1” and “5”.
C To select track 25, press the number button “2”, then “5”.
If you have specified a wrong selection
Press CLEAR (8) on the remote control unit and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
When “X” is displayed on the TV screen in step 4, the chapter you
have selected is not contained in the disc, or chapter search does not
work on the disc.
Before you press ENTER, playback may start automatically when you
enter the section’s number depending on the disc.
This function is not possible for a Video CD with PBC function.
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme (DVD-
RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD and
Audio CD).
1 Press ON SCREEN twice to access the on-screen bar.
2 Press we to select “ , then press ENTER. The pop-up
window appears under the selected item.
3 Press the number buttons to enter the time, then press
ENTER. Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong selection,
Press CLEAR (8) on the remote control unit and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
When “X” is displayed on the TV screen in step 3, you have selected
a point that exceeds the recording time of the disc.
Some DVD VIDEO discs do not contain time information, and it is not
possible to use the Time Search function. In such cases, “X” is
displayed on the TV screen as well.
This function is not possible for a Video CD with PBC function.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press we to select “ , then press ENTER. The pop-up
window appears under the selected item.
3 Press rt to select the desired option, then press ENTER.
NORMAL: Normally select this option.
CINEMA: Suitable for a movie disc, etc.
SHARP: Clearer, sharper-edged picture when viewing images with
lots of flat, same-coloured surfaces such as cartoons.
SOFT: Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
Setting The Progressive Mode
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1 Set the unit to the progressive scan mode. ( pg. 80)
2 Press ON SCREEN twice to access the on-screen bar.
3 Press we to select “ , then press ENTER. The pop-up
window appears under the selected item.
4 Press rt to select the desired option, then press ENTER.
AUTO 1: Used to play a disc containing both video and film source
materials. This system recognises the source type (video or film)
of the current disc according to the disc information. Normally
select this option.
AUTO 2: Almost the same as the “AUTO 1”, but the processing of
the scenes with movement is different. Select “AUTO 1” or
“AUTO 2” to your preference.
FILM: Suitable for playing back a progressive scanned film source
disc.
VIDEO: Suitable for playing back a video source disc. The outlines
on the played back pictures will be soft.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
When the progressive mode is set, be sure to set “L-1 OUTPUT” to
“COMPONENT”. ( pg. 44) Progressive scan is output only from
[COMPONENT VIDEO OUT] connector.
DVD-VIDEO
::
AUTO 1
TIME ENTER
TIME
TIME
TIME
TIME
TIME
Press 1 Press 2
Press 0Press 5
DVD-VIDEO
AUTO 1
DVD-VIDEO
AUTO 2
MV5S_00.book Page 57 Wednesday, August 31, 2005 4:55 PM
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-MV5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-MV5 in the language / languages: English as an attachment in your email.

The manual is 10,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-MV5

JVC DR-MV5 User Manual - German - 100 pages

JVC DR-MV5 User Manual - Dutch - 100 pages

JVC DR-MV5 User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info