56211
29
Zoom out
Zoom in
Previous page
1/100
Next page
Masterpage:Right0
EN 29
Filename [MV5S_08Basic TimerDub.fm]
Page 29Wednesday, 31 August 2005 16:55
TIMER RECORDING
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOWVIEW number.
NOTES:
There may be cases that the SHOWVIEW Timer Programming function
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with the SHOWVIEW Timer Programming function, the beginning of the
second one may be left off the recording.
SHOWVIEW Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1 Press DVD or VHS to select the deck on which you want to
perform timer programming.
2 For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3 Press SHOWVIEW to access the SHOWVIEW screen.
4 Press the number buttons to
enter the S
HOWVIEW number of a
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR (8).
If the number you entered is
invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO.
THEN RETRY” appears on the TV screen. Input a valid S
HOWVIEW
number.
If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen,
set Guide Program numbers manually. ( pg. 83)
When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. ( pg. 34)
5 The SHOWVIEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press RETURN.
6 Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
“STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
“DAILY/WEEKLY” ( pg. 30, “Weekly/Daily Recording”)
“VPS/PDC” ( pg. 30, “VPS/PDC Recording”)
“REC MODE” ( pg. 27, 28, “Recording Mode”)
“NAME” ( pg. 67, “Modify Title Name”) (DVD deck only)
7 Press ENTER to access the Programme Confirmation screen.
8 Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 8.
If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
9 Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
To disengage the timer mode, press TIMER # again.
SHOWVIEW™ Timer Programming
Make sure that the unit’s built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the SHOWVIEW programme screen in step 5. When
this happens, set the correct Guide Program number for that station.
(
pg. 83, “SHOWVIEW
TM
System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the S
HOWVIEW
system:
A PerformS
HOWVIEW™ Timer Programming”.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver’s power on.
ENTER
CLEAR ( )
DVD
0 – 9
VHS
CANCEL
SHOWVIEW
TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “SHOWVIEW
TM
System Setup” ( pg. 83) and
set the Guide Program number correctly.
123
456
789
0
SP
1234
SHOWVIEW PRGM
DATE
START
STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
MV5S_00.book Page 29 Wednesday, August 31, 2005 4:55 PM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-MV5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-MV5 in the language / languages: English as an attachment in your email.

The manual is 10,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-MV5

JVC DR-MV5 User Manual - German - 100 pages

JVC DR-MV5 User Manual - Dutch - 100 pages

JVC DR-MV5 User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info