57388
68
Zoom out
Zoom in
Previous page
1/92
Next page
Filename [MH30_20S_11Editing.fm]
Masterpage:Left0
68 EN
Page 68 Thursday, 7 April 2005 10:14
SYSTEM CONNECTIONS
Simple Connections
This is an example of a simple connection if your TV has one
21-pin AV input (SCART) connector.
Connect the satellite receiver to the [L-2 IN/DECODER] connector,
then connect the [L-1 IN/OUT] connector to the TV’s connector.
NOTES:
Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 65)
You can use the Automatic Satellite Programme Recording
function (A pg. 49) with this connection. (HDD deck only)
To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that AL-2B appears on the front display
panel.
For details, refer to the instruction manual of the satellite
receiver.
Perfect Connections (Recommended)
This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector if you
have a decoder, [L-1 IN/OUT] connector to TV’s connector, and [L-
2 IN/DECODER] connector to the satellite receiver’s connector.
Then connect the satellite receiver and TV.
NOTES:
Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 65)
You can use the Automatic Satellite Programme Recording
function (A pg. 49) with this connection. (HDD deck only)
To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that AL-2B appears on the front display
panel.
To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
For details, refer to the instruction manual of the satellite receiver
and decoder.
Connecting To A Satellite Receiver
IMPORTANT
When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB
(A pg. 65), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the unit is turned off. When the unit is
in Stop mode or recording, press TV AV/VIDEO on the remote
control to turn off the VIDEO lamp on the unit.
If you turn on the unit when the satellite receiver’s power is off,
nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV AV/
VIDEO on the remote control to set the unit to the AV mode.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
ANTENNA OUT
ANTENNA IN
TV
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
TV
Decoder
ANTENNA OUT
ANTENNA IN
MH30_20S_00.book Page 68 Thursday, April 7, 2005 10:14 AM
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-MH20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-MH20 in the language / languages: English as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-MH20

JVC DR-MH20 User Manual - German - 92 pages

JVC DR-MH20 User Manual - Dutch - 92 pages

JVC DR-MH20 User Manual - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info