57388
19
Zoom out
Zoom in
Previous page
1/92
Next page
Masterpage:Right+
EN 19
Filename [MH30_20S_05Name.fm]
INITIAL SETTINGS
Page 19 Thursday, 7 April 2005 10:13
Results Of Auto Set Up/Preset Download Appearing
On The Front Display Panel
If both Auto Channel Set and
Auto Clock Set have been
performed successfully, the
correct current time is displayed.
Turn on the TV and select its AV mode, then make sure that all
necessary stations have been stored in the unit’s memory by using
the PR +/– button(s).
If station names (ID – A pg. 88) have also been stored in the
unit’s memory, the station name will be displayed at the top right
corner of the TV screen for about 5 seconds when the unit is
tuned to a different station.
If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 75 – 76.
If Auto Channel Set has
succeeded but Auto Clock Set
has not, APR 1B (channel
position) is displayed.
OR
If both Auto Channel Set and Auto Clock Set have failed,
A––:––B is displayed.
A Turn on the TV and select its AV mode, then make sure that all
necessary stations have been stored in the unit’s memory by
using the PR +/– button(s).
If station names (ID – A pg. 88) have also been stored in the
unit’s memory, the station name will be displayed at the top right
corner of the TV screen for about 5 seconds when the unit is
tuned to a different station.
If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 75 – 76.
B Perform AClock SetB (A pg. 77).
ATTENTION:
After making sure the cables are connected properly, turn off the
unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen; perform AAuto
Set UpB (A pg. 17) or APreset DownloadB (A pg. 18) again.
IMPORTANT:
To check if the Guide Programme numbers have been set
correctly, perform the S
HOWVIEW Timer Programming. (A pg. 45)
In certain reception conditions, station names may not be stored
correctly, and auto Guide Programme Number Set may not work
properly. If the Guide Programme numbers are not set properly
when you timer record a TV programme using the S
HOWVIEW
system, the unit will record a TV programme of a different station.
When programming the timer using the S
HOWVIEW system, be
sure to check the desired channel is selected correctly.
(A pg. 45)
Your unit memorizes all detected stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture. (A pg. 75, ADelete A ChannelB)
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-
screen display depending on the Country setting you have made in
step 2 on page 17 (unless you have selected ABELGIUMB or
ASUISSEB), as shown below.
If you want to change the language setting manually, see AOn-
screen Language SetB (A pg. 20).
Just Clock
Your unit is equipped with the Just Clock function which provides
accurate time keeping through automatic adjustments at regular
intervals, by reading data from a PDC signal. If you want to take
advantage of this function, simply set it to AONB. (A pg. 77)
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (A pg. 16), the following functions are available. You
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree
of compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you start playback.
For details, refer to the instruction manual of your TV.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are
watching on your TV. When you use this function, set ADIRECT
RECB to AONB. (A pg. 71)
SUOMI B SUOMI ITALIA B ITALIANO
PORTUGAL
B ENGLISH MAGYARORSZÁG B ENGLISH
DEUTSCHLAND
B DEUTSCH ESPAÑA B ESPAÑOL
POLSKA
B ENGLISH NEDERLAND B NEDERLANDS
NORGE
B NORSK GREECE B ENGLISH
SVERIGE
B SVENSKA OTHER WESTERN B ENGLISH
DANMARK
B DANSK
ÖSTERREICH
B DEUTSCH OTHER EASTERN B ENGLISH
ČESKÁ
REPUBLIKA
B ENGLISH
MH30_20S_00.book Page 19 Thursday, April 7, 2005 10:14 AM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-MH20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-MH20 in the language / languages: English as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-MH20

JVC DR-MH20 User Manual - German - 92 pages

JVC DR-MH20 User Manual - Dutch - 92 pages

JVC DR-MH20 User Manual - French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info