56206
61
Zoom out
Zoom in
Previous page
1/68
Next page
61
Others
EN
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment by you may eliminate the problem and restore correct
operation.
Others
Symptom Remedy
Power
The power does not turn on. • Check the mains cable is connected securely.
• Check building circuit the breaker (in case of power failure) .
Picture
There is no picture. • Check signal cables are connected securely.
• Check if a connecting cable is damaged.
• If the setting menu display appears, press [SET UP] or [RETURN] to turn off
the display.
• Check connections to your TV. (See page 15.)
• Switch the input selector on your TV (to “AV1,” for example) until a picture
appears on the screen.
Picture noise appears. • The disc is dirty or flawed.
• If the unit is connected to your TV via a VCR, or if it is connected to a
combination TV / VIDEO player, the copy-protection signal applied to some
DVD programs could affect picture quality. If you still experience this problem
even when you connect the unit directly to your TV, try connecting the unit to
your TV’s S-VIDEO input.
TV programme picture does not fill
the screen.
• Set channels with “Auto Tuning” from the screen menu. (See page 17.)
• Select the channel of a TV program using [PR
+/
-
].
TV programme pictures are
distorted.
• Adjust the direction of the TV antenna.
• Adjust the picture (see the TV instruction manual).
• Place the antenna and the TV farther apart.
• Separate any bunched antenna cables and the TV.
TV channel cannot be changed. Switch the TV input.
• Check if the antenna cable is connected correctly. (See page 15.)
Playback picture is distorted. • Do not bring equipment that may cause electrical interference, such as a
cellular phone, near the unit.
The playback picture or TV
programme from equipment
connected through the unit is
distorted.
• If a DVD player, VCR or tuner is connected to your TV via the unit, the copy-
protection signal applied to some programs could affect picture quality.
Disconnect the playback equipment in question and connect it directly to your
TV.
Sound
There is no sound. • The disc is dirty or flawed.
• Check if all cables are connected securely.
• Check if a connecting cable is damaged.
• Check the connections to the amplifier input.
• Check if the input source setting on the amplifier is correct.
• Check if the recorder is in Pause mode or in Slow-motion Playback mode.
• Check if the recorder is in Fast Forward or Fast Reverse mode.
• If the audio signal is not output from the DIGITAL AUDIO OUTPUT (COAXIAL)
jack, check the Audio setting. (See page 57.)
Sound is noisy. • The disc is dirty or flawed.
Remote control
The remote control does not
function.
• Batteries are exhausted.
• There are obstacles between the remote control and the unit.
• The remote control is too far from the unit.
• There are no batteries in the remote control.
• The unit is not turned on.
• The remote control is not pointed at the remote sensor on the unit.
E6850ED_EN.book Page 61 Wednesday, August 3, 2005 4:02 PM
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DR-M70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DR-M70 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DR-M70

JVC DR-M70 User Manual - German - 68 pages

JVC DR-M70 User Manual - Dutch - 68 pages

JVC DR-M70 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info